Purpose-Built Geometry
R2/3 mm · CW is matched to the RFI application.
Wirutex D01945 HW Replaceable Trim / Profile Knife | R2/3 mm · CW
CA$999.99
Out of stock
SKU
D01945
Product Type
HW Replaceable Trim / Profile Knife
Tool / Unit Family
RFI
Machine / Application
RFI Edgebanding Tooling
Profile
R2/3 mm
Rotation
CW
Cutting Material
HW / Hard Metal Carbide
Replaceable Trim Knife
HW Replaceable Trim / Profile Knife
Wirutex
Wirutex D01945 is a replaceable trim/profile knife for RFI Edgebanding Tooling, used for edge trimming, radiusing or chamfering according to its profile. The knife geometry is R2/3 mm · CW. The cutting material is HW / Hard Metal Carbide.
R2/3 mmProfile
CWRotation
HWCutting Material
RFITool Family
HW Replaceable Trim / Profile Knife
HW Replaceable Trim / Profile Knife for RFI Edgebanding Tooling. R2/3 mm · CW.
HWRFIRFI Edgebanding ToolingSKU D01945
For RFI Edgebanding Tooling. Confirm the exact machine unit, interface, rotation and tool code before installation.
Main Product Description
Wirutex D01945 is a replaceable trim/profile knife for RFI Edgebanding Tooling, used for edge trimming, radiusing or chamfering according to its profile.
The knife geometry is R2/3 mm · CW. The cutting material is HW / Hard Metal Carbide.
Install the knife in the correct cutter seat and orientation, and inspect the clamping surfaces before tightening and returning the unit to service.
Technical Specifications
RFI
- Wirutex
- HW Replaceable Trim / Profile Knife
- D01945
- Edgebanding Trim Tooling
- RFI
- RFI Edgebanding Tooling
- R2/3 mm
- CW
- HW / Hard Metal Carbide
- R2/3 mm
- CW
- HW
- Fine Edge Trimming · Radius Profiling · Chamfering
- For RFI Edgebanding Tooling. Confirm the exact machine unit, interface, rotation and tool code before installation.
Best Fit Applications
Fine Edge Trimming
Radius Profiling
Chamfering
ABS / PVC Edge Processing
Edgebanding Production
Product Highlights
HW / Hard Metal Carbide
Cutting-edge material is matched to the intended industrial woodworking operation and tool family.
Production Tooling
Built for RFI Edgebanding Tooling where this Wirutex tool geometry is specified.
Compatibility & Installation Notes
Confirm the machine model and tooling unit, exact bore or shank interface, rotation, cutter or knife seat, clamping condition and operating-speed limits before production. Inspect all contact surfaces and follow the machine and tooling manufacturer's installation requirements.
Wirutex Production Tooling
HW Replaceable Trim / Profile Knife for RFI Edgebanding Tooling, with R2/3 mm · CW.
Correct machine fit, rotation, clamping, extraction and operating parameters are essential to safe, repeatable cutting performance.