SCM K 100 Evo
SCM K 100 Evo Automatic Edge Bander
Compact automatic edgebander for small woodworking and panel shops that need professional edge quality, automatic setup support, multi-radius tools, and 5 mm strip-edge capability.
Small-shop professional edgebanding with automatic setup support and a compact SCM footprint.
The SCM K 100 Evo is a compact single-sided automatic edgebander for small woodworking shops, cabinet shops, closet shops, furniture builders, and panel-processing companies that need professional results without stepping into a larger Olimpic 300, Olimpic 500, or Stefani platform.
For Titan, the K 100 Evo should be positioned as the compact professional SCM edgebander for shops moving up from manual or entry-level edging into better setup control, multi-radius finishing, touch-screen operation, and repeatable panel-edge quality.
Best-fit shop profile
The K 100 Evo is the right machine conversation when the customer is fighting inconsistent manual edging, messy glue lines, too much hand cleanup, slow changeovers, operator guesswork, or the need to produce better panels without buying a larger industrial machine.
Automatic pneumatic on/off, multi-radius tools, 10" eye-S control, and optional 5 mm strip-edge capability.
The K 100 Evo gives smaller shops 8–50 mm panel thickness, 0.4–3 mm coil edge capacity, 5 mm extended strip-edge value depending on kit, 7 m/min feed speed, 6 bar compressed air basis, automatic setup support, and eye-S Compact control with Maestro active edge.
Automatic setup support
Automatic pneumatic on/off systems controlled by the machine NC help reduce setup time and improve repeatability when switching edge programs.
Multi-radius tools
Multi-radius tools support different edge thicknesses with faster setup, helping small shops handle common cabinet and panel edge requirements.
eye-S Compact console
The 10" touch screen with Maestro active edge gives operators graphical machine-function control in an approachable small-shop interface.
5 mm strip-edge potential
The 5 mm extended value should be positioned as optional or package-dependent strip-edge capability until Titan confirms the quoted configuration.
Built for cabinet panels, closets, light commercial millwork, furniture, casegoods, and starter automatic edgebanding.
The K 100 Evo is designed for small shops that need common 0.4–3 mm coil edging, professional finishing, and occasional heavier strip-edge capability when configured correctly.
Cabinet Shops
Strong fit for kitchen cabinet parts, gables, shelves, drawer fronts, doors, fillers, finished ends, and standard casework panels.
Closet & Storage Shops
Useful for closet shelves, partitions, wardrobe panels, garage storage components, utility cabinet parts, and repeated panel programs.
Small Commercial Millwork
Built for light commercial casework, office cabinetry, retail fixtures, reception millwork, and exposed panel components.
Furniture & Casegoods
Fits panel furniture, shelving units, doors, fronts, sides, and small production runs.
Starter Automatic Edgebanding
Best for shops moving from portable or manual edgebanding into a proper single-sided automatic machine.
Compact Panel Processing
Strong fit where operator ease of use matters as much as raw production speed.
SCM K 100 Evo
A compact automatic edgebander for small woodworking and panel-processing companies that need professional finished-edge quality in a smaller footprint.
The SCM K 100 Evo is a compact automatic edgebander designed for small woodworking and panel-processing companies that need professional edge quality without stepping into a larger Olimpic or Stefani platform.
SCM’s official product family names the machine Olimpic K 100, while Titan publishes it as SCM K 100 Evo. The technical data aligns around 8–50 mm panel thickness, 0.4–3 mm edge thickness, a 5 mm extended value, 7 m/min feed speed, and 6 bar compressed air.
The machine’s main advantage is bringing higher-level setup support into a compact edgebander. Automatic pneumatic on/off systems controlled by the machine NC support faster setup for trimming, edge scraping, and glue scraping units where equipped.
Multi-radius tools help the machine handle different edge thicknesses with automatic setup support, reducing operator error and making daily changeovers more manageable for small shops.
The eye-S Compact Console uses a 10" touch screen with Maestro active edge, giving the operator graphical access to machine functions. This makes the K 100 Evo easier to position for smaller shops where one or two people may need to operate multiple machines.
Titan sales position
Position the K 100 Evo around small-shop professional edgebanding: better edge quality, faster setup, multi-radius finishing, touch-screen control, compact footprint, and a clean upgrade path into Olimpic 300, Olimpic 500, and Stefani platforms.
Use the K 100 Evo as the compact automatic SCM step before Olimpic 300, Olimpic 500, and Stefani machines.
The K 100 Evo sits above very small or basic edgebanders when the customer wants stronger automatic setup features, multi-radius tools, a 10" touch interface, and a more complete machining and finishing workflow.
Good: ME-Series
Best for simpler, lower-cost, or lighter edgebanding requirements where the customer needs a basic SCM entry machine.
Better: K 100 Evo
Best for compact automatic edgebanding with automatic on/off systems, multi-radius tools, eye-S control, and 5 mm strip-edge potential.
Best-Fit Upgrade: Olimpic 300 / 500
Best when the shop needs more speed, wider panel range, stronger production workflow, or a larger automatic edgebander platform.
Industrial Upgrade
Best when the customer needs higher throughput, advanced glue systems, hot air, AirFusion+, more automation, or heavier production architecture.
K 100 Evo specifications without table formatting.
Final published specifications should follow the quoted Titan/Canadian configuration. Confirm final naming, 5 mm strip-edge kit, premilling, grooving, glue system, panel pre-heating, electrical package, dust extraction, compressed air, footprint, installation, training, warranty, and service path.
For small shops that want SCM automatic setup support, multi-radius finishing, touch-screen control, and professional panel-edge quality.
The K 100 Evo should be sold as a compact professional edgebander for small shops. The correct package depends on edge material, 5 mm strip-edge need, premilling, grooving, glue system, panel pre-heating, dust extraction, compressed air, electrical package, operator workflow, and future upgrade path.
Strong fit for
Shops that want better edge quality, faster setup, and more repeatable results than manual or very basic machines can provide.
Confirm during quoting
The K 100 Evo is configuration dependent. Final customer-facing publishing should match Titan’s quoted Canadian configuration.
Request an SCM K 100 Evo machine quote.
Send Titan your panel materials, edge types, 5 mm strip-edge requirements, current edge process, setup pain points, glue system needs, production speed, dust collection, compressed air, shop power, and future upgrade path. We will help confirm whether the K 100 Evo is the right compact automatic edgebander for your shop.