SCM Olimpic 500
SCM Olimpic 500 Automatic Edge Bander
Compact automatic edgebander for small-to-medium shops that need strong edge quality, 60 mm narrow-panel capability, two-radius machining, and EVA/PUR glue flexibility.
The compact 500-series edgebander for shops moving into reliable daily automatic production.
The SCM Olimpic 500 is a single-sided automatic edgebander designed for small-to-medium companies that need dependable edge quality, repeatable setup, and practical production speed in a compact machine.
For Titan, the Olimpic 500 should be positioned as a clean production upgrade for shops that have outgrown manual or entry-level edgebanding but do not yet need the Olimpic 500Plus or Stefani industrial platforms.
Best-fit shop profile
The Olimpic 500 is the right machine conversation when the customer is fighting slow manual edging, inconsistent glue lines, limited edge thickness, unreliable trimming/scraping quality, or narrow parts that are awkward to run.
Compact production value with 0.3–6 mm edge capacity, 60 mm narrow-panel handling, two-radius finishing, and SGP-E glue control.
The Olimpic 500 gives growing shops 0.3–6 mm edge thickness, 8–60 mm panel thickness, 60 mm minimum panel width, 12 m/min feed speed, 6 bar compressed air basis, pneumatic or electronic setup versions, and marketable EVA/PUR glue flexibility.
Compact automatic production
The Olimpic 500 gives small-to-medium shops a serious automatic edgebander without jumping into larger Stefani industrial architecture.
60 mm narrow-panel capability
The 60 mm minimum panel width supports filler strips, rails, closet parts, shelving strips, and smaller repeated panel components.
SGP-E glue pot workflow
SGP-E glue pot positioning supports cleaner glue-line control, EVA/PUR glue change capability, and better production flexibility.
Two-radius machining
Two-radius capability with dedicated tools helps shops move between common edge programs without stepping into a larger machine class.
Built for cabinet panels, closets, commercial millwork, furniture, casegoods, narrow parts, and daily panel production.
The Olimpic 500 covers the core panel work found in cabinet shops, closet systems, casework, shelving, furniture components, and exposed decorative panels.
Cabinet Manufacturing
Strong fit for kitchen cabinet panels, gables, shelves, drawer fronts, doors, finished ends, utility cabinets, and exposed components.
Closet & Storage Systems
Useful for wardrobe parts, closet panels, dividers, garage storage panels, adjustable shelves, and narrow components down to 60 mm.
Commercial Millwork
Built for office, retail, institutional, hospitality, and healthcare casework where consistent edgebanding quality matters.
Furniture & Casegoods
Fits panel furniture, shelving, fronts, case components, and decorative panel parts.
Small-to-Medium Panel Shops
Ideal for production environments needing automatic edgebanding without Stefani-level speed, automation, or glue-system complexity.
Growth-Ready Production
A strong step for businesses planning to grow into Olimpic 500Plus or Stefani platforms later.
SCM Olimpic 500
A compact single-sided automatic edgebander for small-to-medium shops that need reliable production edging, clean finishing, and strong operator control.
The SCM Olimpic 500 is a single-sided automatic edgebander built for small-to-medium companies that need dependable edge quality, repeatable setup, and practical production speed in a compact machine.
The machine’s working range covers the core needs of cabinet and panel production: 0.3–6 mm edge thickness, 8–60 mm panel thickness, 60 mm minimum panel width, 12 m/min feed speed, and 6 bar compressed air.
Titan’s current product positioning adds several strong production points: the Olimpic 500 is available in pneumatic or electronic setup versions, can machine two radii with dedicated tools, uses the SGP-E glue pot for quick EVA/PUR glue changes, and includes Multiedge finishing across the working units.
The operator workflow is also a key sales point. Large touchscreen controls, Maestro Active Edge software, automatic edge feeding outside the cabin, reduced setup time, and improved safety all help position the machine for shops that need a clear, repeatable setup process rather than a fully manual adjustment workflow.
Titan sales position
Position the Olimpic 500 around compact production value, clean glue-line control, two-radius finishing, 60 mm narrow-panel capability, EVA/PUR glue flexibility, and steady 12 m/min production speed.
Use the Olimpic 500 as the compact automatic 500-series step before 500Plus and Stefani industrial machines.
The Olimpic 500 sits above smaller SCM ME / K-series edgebanders and below the Olimpic 500Plus, Stefani KD, and larger Stefani platforms.
Good: ME / K-Series
Best for smaller shops, lighter edgebanding needs, and lower-complexity edge programs.
Better: Olimpic 500
Best for compact automatic edgebanding, 0.3–6 mm edge capacity, 60 mm narrow-panel handling, and two-radius capability.
Best-Fit Upgrade: Olimpic 500Plus
Best when the customer needs higher feed speed, EVA/PUR/hot-air flexibility, 0.3–8 mm edge capacity, or HP-version NC-axis setup.
Industrial Upgrade: Stefani
Best when the customer needs Stefani-level production, larger edge thickness, AirFusion+, advanced glue systems, three-radius support, or line integration.
Olimpic 500 specifications without table formatting.
Final published specifications should follow the quoted Titan/Canadian configuration. Confirm pneumatic vs electronic setup, SGP-E glue pot, EVA/PUR package, operating-unit composition, two-radius tooling, electrical package, dust extraction, compressed air, footprint, installation, training, warranty, and service path.
For small-to-medium shops that need reliable automatic edgebanding, cleaner glue lines, narrow-panel support, and two-radius finishing.
The Olimpic 500 should be sold as a practical automatic edgebanding upgrade. The correct package depends on edge material, edge thickness, glue type, setup version, radius programs, dust extraction, compressed air, electrical package, operator workflow, and future upgrade path.
Strong fit for
Shops that have outgrown basic edgebanders and need better glue-line quality, more reliable finishing, and stronger production rhythm without overbuying machine capacity.
Confirm during quoting
The Olimpic 500 is configuration dependent. Final customer-facing publishing should match Titan’s quoted Canadian configuration.
Request an SCM Olimpic 500 machine quote.
Send Titan your panel materials, edge types, EVA/PUR requirements, setup preference, radius programs, current edgebander limitations, production speed, dust collection, compressed air, shop power, and future upgrade path. We will help confirm whether the Olimpic 500 is the right automatic edgebander for your shop.