A professional electronic sliding table saw built for cabinet shops, furniture manufacturers, millwork operations, and panel-processing teams that want 400 mm saw capacity, clean scoring support, programmable setup workflow, and a stronger production-control story than a standard manual saw.
Professional Class-series cutting with electronic setup support, scoring capability, and connected workflow potential.
The SCM Class SI 400EP is the electronic / programmed version of SCM’s Class SI 400 sliding table saw platform. It is aimed at shops that need accurate daily cutting, cleaner panel results, repeatable setup, and a better operator workflow than a conventional manual production saw.
Published SI 400EP positioning identifies a 400 mm maximum main blade with mounted scorer, blade projection of 140 mm at 90° and 97 mm at 45°, rip capacity from 1000 to 1500 mm depending on package, and maximum squaring-stroke configurations in the 3200–3800 x 3200 mm range.
The key differentiator is the electronic workflow package: eye-S control with 10″ colour touchscreen, Maestro active interface, motorized programmable rip-fence capability, suspended protection upgrades, improved suction, laser cutting-line projection, and an arch-ground steel sliding carriage for smooth, stable support.
400 mmMaximum Main Blade
140 mmProjection at 90°
1000–1500 mmRip Capacity
eye-S / MaestroElectronic Workflow
Capability Matrix
Five practical capabilities for repeatable electronic cutting and panel workflow.
The Class SI 400EP combines precise rip work, scored-panel support, full-size squaring options, programmable setup capability, and a stronger operator-control environment in one professional SCM Class platform.
Mode 01
Precision Rip Sizing
Package-dependent 1000–1500 mm rip capacity and motorized programmable fence workflow support accurate repeat sizing for cabinet parts, furniture components, and sheet processing.
Mode 02
Clean Scored Panel Cutting
The mounted scoring system supports cleaner cutting on melamine, laminate, veneer, MDF, plywood, particleboard, and other finished panels when the final package is matched correctly.
Mode 03
Electronic Job Setup
eye-S with Maestro Active gives the operator a cleaner interface for repeat jobs, stored settings, guided setup, and a more organized workflow than a standard manual sliding saw.
Mode 04
Full-Size Panel Handling
Maximum squaring-stroke configurations in the 3200–3800 x 3200 mm range let the SI 400EP support cabinet sheets, closet panels, furniture panels, and larger production parts.
Mode 05
Connected Workflow Potential
The SI 400EP story can extend into shared work programs, shared tool databases, activity reports, self-diagnosis, remote troubleshooting, and SCM Thundercut workflow integration where configured.
Production Advantages
Built around cleaner setup, repeatability, and a stronger electronic control story.
The SI 400EP is positioned above a standard manual saw by pairing Class-series cutting capacity with operator guidance, programmable fence capability, and a more connected production workflow.
eye-S and Maestro Active
The 10″ colour touchscreen and Maestro Active interface create a cleaner operator experience for job changes, repeat setups, and daily production control.
Stable Cutting Platform
The arch-ground steel sliding carriage, configurable crosscut support, and motorized rip-fence capability help the SI 400EP deliver smooth panel movement and dependable repeat sizing.
Connected Shop Value
Thundercut-ready workflow, shared programs, shared tool data, self-diagnosis, and remote troubleshooting support strengthen the SI 400EP conversation for organized production environments.
Equipment Range
Lineup Positioning
01
Good: Class SI 400
Best for professional shops that want strong Class-series cutting performance with a more conventional manual production workflow.
02
Better: Class SI 400EP
The electronic Class-series choice for shops that want eye-S control, programmable setup, repeatable rip-fence accuracy, scoring support, and connected workflow potential.
03
Best: Blade Off / L’invincibile
Best for customers prioritizing Blade Off safety technology, flagship sliding-saw architecture, or a premium SCM saw investment above the SI 400EP platform.
Technical Specifications
Class SI 400EP
Machine Profile
ManufacturerSCM
SeriesClass
ModelSI 400EP
Machine TypeElectronic sliding table saw
Cutting Capacity
Maximum Main Blade400 mm with mounted scorer
Blade Projection140 mm at 90° / 97 mm at 45°
Rip Capacity1000–1500 mm, package dependent
Maximum Squaring Stroke3200–3800 x 3200 mm
Control and Workflow
Controleye-S 10″ touchscreen with Maestro Active interface
Rip FenceMotorized programmable option
Scoring SystemMounted scoring unit; confirm final package
Connected WorkflowThundercut integration and shared-program features where configured
Additional FeaturesSuspended protection, improved suction, and laser line projector as configured
Sliding CarriageArch-ground steel carriage for smooth, stable panel support
Configuration Notes
Electrical RequirementsConfirm voltage, phase, frequency, amperage, transformer, and certification
Capacity PackageConfirm table stroke, rip-fence range, and scoring configuration
Support ScopeConfirm delivery, installation, training, warranty, and service support
Final PackageConfirm blades, scoring setup, fence package, extraction, and accessories
Production Environments
Where the Class SI 400EP Fits
A strong fit for professional shops that want Class-series cutting strength plus cleaner setup control, scoring support, and a more repeatable operator workflow.
Cabinet and Closet Production
Ideal for cabinet sides, shelves, stretchers, partitions, drawer parts, fillers, finished ends, closet panels, and repeat casework production.
Furniture and Millwork
Supports furniture panels, table parts, case components, door parts, wall panels, feature panels, frame work, and other mixed-material precision cutting.
Finished Panels and Sheet Goods
The scoring system and 400 mm saw class make the SI 400EP a strong option for veneered, laminated, melamine-faced, MDF, plywood, and particleboard cutting.
Electronic Class Production
A modern sliding-saw station for clean panels, repeat parts, and organized daily setup.
The SCM Class SI 400EP adds a stronger control and workflow story to the proven Class SI 400 cutting platform, making it a compelling saw for shops that want electronic setup support without jumping to a premium flagship machine tier.
Its 400 mm blade class, scoring support, full-size panel-handling options, and programmable rip-fence capability create a dependable station for cabinet, furniture, and millwork production.
The result is a professional machine with real shop-floor presence: stable material handling, repeatable accuracy, and an operator experience designed around cleaner setup and better production flow.
