SCM Sergiani Las
SCM Sergiani LAS Automatic Continuous-Cycle Press
A high-production through-feed multi-daylight press for hollow-core doors, veneer/HPL/CPL coated doors, laminated components, and 2- or 3-layer pre-finished parquet.
Continuous Pressing for Door, Coated Panel & Parquet Production
The SCM Sergiani LAS is built for manufacturers that need automated pressing output, stable glue quality, and reduced loading and unloading downtime. It is a through-feed, multi-daylight, continuous-cycle press platform designed for hollow-core doors, coated veneer/HPL/CPL doors, furniture door production, laminated components, and pre-finished parquet.
Key Advantages
The Sergiani LAS keeps production moving by loading or unloading one compartment while the other press compartments remain under pressure. This supports higher line rhythm, better gluing consistency, and a compact production layout compared with less efficient pressing methods.
Continuous-Cycle Operation
Sequential loading allows one door or panel to move through the press while other compartments remain under controlled pressure.
High Door-Line Output
Built for high-volume door and parquet production where production rhythm, glue timing, and reduced downtime are critical.
Constant Pressing Quality
Each door or panel has its own press compartment, supporting stable surface quality and gluing consistency during production.
Reduced Line Footprint
The continuous multi-daylight concept helps reduce occupied space compared with larger simultaneous-loading press arrangements.
Applications
Hollow-Core Doors
Designed for hollow-core door plants where glue timing, pressing consistency, and high-volume output drive the production process.
Coated Door Manufacturing
Fits veneer, HPL, and CPL coated doors, furniture doors, cabinet doors, laminated doors, and decorative door production.
Pre-Finished Parquet
Supports 2- or 3-layer pre-finished parquet production where layered construction and reliable bonding quality are required.
Rapid-Glue Production
Can be reviewed for water-based, PUR, UF, PVAc, and related glue systems depending on the product construction and press cycle.
Machine Information
The SCM Sergiani LAS is a patented automatic continuous-cycle press designed for industrial door, coated-panel, and parquet production. It is not a general-purpose manual press. It is a through-feed multi-daylight pressing platform for manufacturers that need continuous production flow, constant pressure, reliable glue quality, and reduced downtime between loading and unloading cycles.
The LAS is built for hollow-core doors, coated doors using veneer, HPL, or CPL, furniture doors, laminated components, and 2- or 3-layer pre-finished parquet. The core production concept is simple: one door or panel can be loaded or unloaded while the other press compartments continue holding pressure. This allows the line to maintain press quality while improving production rhythm.
SCM markets the LAS for high productivity, including output up to one door every 20 seconds and over 1,200 doors per shift, depending on configuration, glue system, product construction, and line setup. The machine supports rapid gluing workflows, including water-based and PUR systems, with additional brochure references to bi-component water-based glues such as UF and PVAc.
The LAS platform is available in LAS S, LAS P, and LAS 3 versions, with platen sizes including 2500 × 1300 mm, 2800 × 1400 mm, 2800 × 1300 mm, and 3350 × 1400 mm. Depending on the selected model, the press can be configured with 5, 6, 7, or 10 daylights and total thrust ratings of 120 tons, 140 tons, 175 tons, or 200 tons.
LAS Model Positioning
LAS S
Configured around 2500 × 1300 mm or 2800 × 1400 mm platen sizes, with 5, 6, or 10 daylights and 120 or 140 tons total thrust depending on platen size.
LAS P
Configured around 2500 × 1300 mm or 2800 × 1300 mm platen sizes, with 5, 6, or 10 daylights and 200 tons total thrust.
LAS 3
Configured around 3350 × 1400 mm platen size, with 5 or 7 daylights and 175 tons total thrust for larger door or panel requirements.
Technical Features
The Sergiani LAS is a high-production automatic continuous-cycle press. Final specifications depend on the selected LAS version, platen size, number of daylights, thrust package, heating system, glue system, conveyor layout, safety guarding, and upstream or downstream line integration.
Coated Doors
Furniture Doors
Laminated Door Components
HPL
CPL
Improved Pressing Rhythm
Stable Glue Timing
Longer Product Formats
Industrial Pressing Lines
PUR
Water-Based Systems
UF / PVAc References by Brochure
Platen Cleaning
Pressed-Panel Expulsion
Automatic Lengthways Centering
Number of Daylights
Total Thrust
Heating System
Platen Temperature Range
Glue System
Composition Station
Conveyors
Centering Package
Upstream / Downstream Equipment
Compressed Air
Ventilation
Glue-Vapour Extraction
Installed Footprint
Safety Guarding
Rigging Access
Where the Sergiani LAS Fits
The Sergiani LAS fits manufacturers that need continuous pressing output, reliable gluing quality, fast loading and unloading flow, and a purpose-built press line for doors, coated components, or parquet.
Door Manufacturing Plants
Strong fit for hollow-core doors, coated doors, furniture doors, laminated doors, and high-output door pressing lines.
Coated Panel & Furniture Door Lines
Supports veneer, HPL, CPL, laminated components, furniture doors, decorative panels, and high-volume glued assemblies.
Pre-Finished Parquet Production
Built for 2- or 3-layer parquet manufacturers that need continuous pressing, stable bonding, and production-line integration.
Request a Machine Quote
Tell us what you press, how your line runs, and what the machine needs to accomplish.
Ready to Start?
Send Titan your press-line requirements and we will help review the right Sergiani LAS configuration for your production environment.