SCM Omal Jolly Colla
SCM Omal Jolly Colla Precision Glue Dosing Machine
Automatic precision glue-dosing system for dowel construction, drawer-box assembly, and clean case-clamp preparation.
A small assembly-process upgrade that solves a real shop-floor glue consistency problem.
The SCM Omal Jolly Colla is an automatic multifunctional precision glue-dosing machine designed to apply exact quantities of glue in either impulse or continuous mode. It is especially useful for cabinet manufacturers using dowel construction and for shops needing controlled glue application before drawer-box assembly or case-clamp assembly.
For Titan, the Jolly Colla should be positioned as a doweling and assembly workflow accessory, not as a CNC drilling or dowel-inserting machine. It belongs beside case clamps, drawer-box assembly stations, dowel-construction workflows, and Omal drill/glue/dowel equipment where controlled glue dosing matters.
Best-fit shop profile
The Jolly Colla is the right conversation when the customer is using squeeze bottles, fighting glue mess, seeing inconsistent joint fill, dealing with starved glue joints, or trying to standardize assembly before case clamping.
Impulse or continuous dosing, electronic glue quantity control, push-button gun operation, pressurized tanks, and single or dual injector options.
The Jolly Colla helps assembly departments apply repeatable glue volumes before parts go into a clamp. The result is a cleaner process, fewer glue-variation issues, less excess glue cleanup, and better control compared with manual squeeze-bottle application.
Controlled glue volume
Glue quantity is adjusted electronically using a potentiometer, helping standardize glue output instead of relying on hand pressure.
Impulse or continuous dosing
Operators can use single-shot impulse mode or continuous mode depending on the hole pattern, joint type, and assembly workflow.
Dedicated washing tank
Separate glue and washing tanks support cleaner system maintenance and easier purging of the glue circuit.
One or two guns
Single or dual injector configurations allow the final setup to match the shop’s assembly bench, case clamp, or dowel workflow.
Built for dowel construction, drawer boxes, case clamps, furniture parts, fixtures, and assembly departments.
The Jolly Colla improves one of the most common manual steps in cabinet and casework production: applying the right amount of glue before the parts are assembled and clamped.
Cabinet Manufacturing
Controlled glue application for dowel construction, cabinet case assembly, end panels, fixed shelves, partitions, stretchers, and case-clamp preparation.
Drawer-Box Assembly
Repeat glue dosing for drawer sides, fronts, backs, and dowel-joined drawer-box parts before assembly.
Commercial Casework
Glue application before clamping on institutional, office, healthcare, retail, and commercial cabinetry.
Furniture Production
Dowel-joined parts, frame components, panel assemblies, and repeat glue joints where controlled glue volume matters.
Assembly Departments
Useful as a dedicated glue station near clamps, dowel-insertion systems, drawer assembly benches, or CNC drill/glue/dowel machines.
Omal Workflow Support
Pairs naturally with Omal dowel machinery, case clamps, drawer-box workflows, and cabinet assembly cells.
SCM Omal Jolly Colla
A compact automatic glue-dosing system designed to bring repeatability and control to dowel construction, drawer-box assembly, and cabinet case assembly.
The SCM Omal Jolly Colla is a compact automatic glue-dosing system designed to bring repeatability and control to assembly work. It is especially useful in dowel construction, drawer-box assembly, and cabinet case assembly where the correct amount of glue needs to be applied before parts are clamped.
The system applies glue in either impulse / single-shot mode or continuous mode. Glue quantity is controlled electronically using a potentiometer, while the operator activates the gun with a simple electric push button. This keeps the machine easy to use while giving the shop more control than manual bottle dosing.
The Jolly Colla includes two pressurized tanks: one for glue and one for washing or purging liquid. Official data lists both tanks at 8 liters / 2 gallons. The washing tank supports cleaner system maintenance and helps reduce downtime related to glue-system cleanup.
For production shops, the strongest value is consistency. Manual squeeze-bottle glue application can result in either excess glue, causing cleanup issues, or too little glue, creating a starved joint and possible joint failure. The Jolly Colla solves that by applying a controlled amount of glue repeatedly before the part moves into assembly or clamping.
From a Titan Equipment standpoint, this machine should be sold as a small but important assembly-process upgrade. It is not a large machine, but it can improve assembly consistency, reduce glue mess, and help shops standardize one of the most common manual steps in dowel construction.
Titan sales position
Position the Jolly Colla around controlled glue volume, cleaner assembly, fewer joint-quality issues, and repeatable glue dosing for dowel construction, drawer boxes, and case-clamp preparation.
Use the Jolly Colla as the controlled glue-dosing accessory, not as a drill/glue/dowel CNC machine.
The Jolly Colla should be kept separate from Omal HBD, Velox, Cube, and HG2 machinery. It is a precision glue-metering station for assembly workflows, not a CNC drilling, dowel-inserting, or hinge-inserting machine.
Good: Manual Glue Bottles
Best only for very low-volume assembly where inconsistent output, cleanup time, and operator variation are acceptable.
Better: Jolly Colla
Best for controlled glue dosing, cleaner assembly, repeatable output, and reduced glue variation before clamping.
Best: Omal HBD / Velox / Cube
Best when the customer needs automated drilling, glue injection, and dowel insertion in a CNC-style production workflow.
Separate: Omal HG2
HG2 is for hinge drilling and insertion. Keep it separate from the Jolly Colla glue-dosing conversation.
Jolly Colla specifications without table formatting.
Final published specifications should follow the quoted Titan/Canadian configuration. Confirm one- or two-injector package, voltage, approved glue types, viscosity, washing liquid, hoses, nozzles, spare parts, and category placement before publishing.
For shops that want repeatable glue dosing for dowel construction, drawer boxes, and case-clamp assembly without relying on inconsistent manual glue bottles.
The Jolly Colla should be sold as an assembly-process upgrade. The correct package depends on glue type, injector count, viscosity, tank requirements, washing procedure, assembly station layout, clamp workflow, voltage, hoses, guns, nozzles, and spare parts.
Strong fit for
Shops that already use dowel construction, case clamps, drawer-box assembly stations, or Omal dowel equipment and want better glue consistency.
Confirm during quoting
The Jolly Colla is configuration dependent. Final customer-facing publishing should match Titan’s quoted Canadian configuration.
Request an SCM Omal Jolly Colla machine quote.
Send Titan your assembly workflow, dowel construction method, drawer-box or case-clamp process, glue type, viscosity, injector count, current glue application process, cleanup problems, voltage requirements, and whether you are pairing this with Omal dowel equipment or a case clamp.