Verified 0.125-Inch Kerf
The published cutting width supports consistent horizontal slots where a 0.125-inch kerf is required.
Vortex Tool Three-Wing Slotting Cutter, 2" Diameter × 0.125" Kerf
CA$999.99
Out of stock
SKU
6610
Product Type
Three-wing slotting cutter
Series
Vortex Tool Series 6600
Cutting Geometry
Three brazed carbide-tipped cutting wings
Cutter Diameter
2 in
Kerf
0.125 in
Shank Diameter
1/2 in
Depth of Cut
Up to 3/4 in
Construction
Carbide-tipped edges · One-piece alloy-steel body
Applications
Horizontal slots and compatible flush trimming in wood,composites and plastic
Three-Wing
Slotting Cutter
Three-Wing Slot Cutter
A carbide-tipped Vortex profile cutter built on a precision-machined, one-piece alloy-steel body. SKU 6610 combines a 2-inch cutter diameter, 0.125-inch kerf, 1/2-inch shank, 3/4-inch cutting depth, and three-wing geometry for horizontal slotting and compatible flush-trimming operations.
2 inCutter Diameter
0.125 inKerf Width
3 WingCutting Geometry
3/4 inDepth of Cut
Three-Wing Slot Cutter
This Series 6600 cutter uses brazed carbide cutting tips on a one-piece alloy-steel body for horizontal slots and flush-trimming work in compatible wood, wood-composite, and plastic materials.
Carbide TippedThree Wing1/2 in ShankSKU 6610
Designed for compatible routers and CNC routing systems using a precision 1/2-inch collet or holder. Machine clearance, cutter projection, slot depth, workholding, and the full 2-inch cutter diameter must be confirmed before operation.
Main Product Description
The Vortex Tool 6610 is the 0.125-inch-kerf model in the Series 6600 three-wing slotting-cutter family. Vortex constructs the cutter from a precision-machined, one-piece alloy-steel body and equips it with brazed carbide cutting tips.
Its 2-inch diameter and 3/4-inch depth-of-cut capacity are intended for horizontal slotting and compatible flush-trimming operations. Vortex specifies the series for wood, wood composites, and plastic, making the 6610 a practical selection when a 1/8-inch slot width is required.
The verified configuration uses three cutting wings, a 1/2-inch shank, a 2-inch cutter diameter, and a 0.125-inch kerf. Correct collet condition, shank engagement, cutter clearance, workholding, feed, spindle speed, chip evacuation, and toolpath strategy remain essential to cut quality and machine operation.
Technical Specifications
Three-Wing Slotting Cutter · SKU 6610
- Vortex Tool
- Three-Wing Slotting Cutter
- 6610
- Series 6600
- 3 Wings
- Brazed Carbide Tips
- Precision-Machined One-Piece Alloy Steel
- 2 in
- 0.125 in
- 1/2 in
- 3/4 in
- Horizontal Slotting and Compatible Flush Trimming
- Verified Materials: Wood, Wood Composites, and Plastic
- Designed for compatible routers and CNC routing systems using a precision 1/2-inch collet or holder. Machine clearance, cutter projection, slot depth, workholding, and the full 2-inch cutter diameter must be confirmed before operation.
Best Fit Applications
1/8-Inch Horizontal Slots
Wood Slotting
Wood-Composite Routing
Plastic Slot Cutting
Compatible Flush Trimming
Product Highlights
Three-Wing Carbide-Tipped Design
Three brazed carbide-tipped wings provide the official Series 6600 cutting configuration on a rigid one-piece body.
3/4-Inch Cutting Depth
The 2-inch-diameter cutter is specified for horizontal slotting and compatible trimming operations up to 3/4 inch deep.
Compatibility & Installation Notes
Use a clean, undamaged precision 1/2-inch collet or compatible holder and maintain adequate shank engagement without contacting the cutter body. Confirm clearance for the full 2-inch diameter, the planned 3/4-inch maximum cutting depth, and all machine guards or fixtures. Verify spindle condition, rotation, workholding, entry strategy, feed rate, spindle speed, chip evacuation, and toolpath direction before production. Do not use the cutter if any carbide tip, wing, body section, or shank is damaged.
Controlled 1/8-Inch Slots
Vortex Tool 6610 combines a precision-machined one-piece alloy-steel body with three brazed carbide-tipped wings, a 2-inch diameter, and a verified 0.125-inch kerf.
Correct collet fit, cutter clearance, workholding, toolpath strategy, cutting parameters, and chip evacuation are essential for producing consistent horizontal slots in compatible wood, composite, and plastic materials.