Three-Flute Finishing Geometry
Three continuous cutting edges distribute tool engagement for controlled finish routing when chip load, runout, and machine conditions are correctly managed.
Royce Ayr Solid Carbide Triple-Flute Downcut Finishing Router Bit D20 × CL102 mm 3-Tooth Right-Hand
CA$999.99
Out of stock
SKU
R59-01015
Product Type
Solid-Carbide Triple-Flute Downcut Finishing Router Bit
Series
Triple-Flute Downcut / R59-010 Series
Cutting Diameter
20 mm (0.7874 in.)
Cutting Edge
102 mm (4.0157 in.)
Shank
20 mm (0.7874 in.)
Overall Length
Not published — verify physical tool
Flutes
3
Cutting Geometry
Continuous-Edge Finisher
Cutting Direction
Downcut
Rotation
Right-Hand (RH)
Material
HW / Solid Carbide
Application
Solid-Wood and Hard-Plastic Finish Routing
Triple-Flute Downcut
Finishing Router Bit
Triple-Flute Downcut Finishing Router Bit
Solid-carbide, right-hand, three-flute downcut finishing router bit with a 20 mm cutting diameter, 102 mm cutting edge, and 20 mm shank. Its downcut geometry is intended for controlled finish passes in solid wood, hard plastics, fibreboard, and compatible laminated materials.
D=20 mm0.7874 in. Diameter
CE=102 mm4.0157 in. Cutting Edge
Sh=20 mm0.7874 in. Shank
Z=3Downcut Finishing Flutes
Triple-Flute Downcut Finishing Router Bit
A long-cut HW solid-carbide finishing tool combining three continuous cutting flutes with right-hand downcut geometry for controlled finish routing in compatible CNC systems.
Solid Carbide3 FlutesDowncut · RHSKU R59-01015
Designed for compatible CNC routers using an exact 20 mm precision collet or approved 20 mm toolholding system. Confirm tool projection, spindle clearance, workholding, and cutting parameters before use.
Main Product Description
The Royce Ayr Triple-Flute Downcut Finishing Router Bit R59-01015 is identified in Titan’s catalogue as a 20 mm-diameter solid-carbide downcut finisher with a 102 mm cutting edge, 20 mm shank, and three-flute geometry. The long cutting envelope supports deep finish-routing work where adequate clearance, rigid toolholding, and secure workholding are available.
Royce Ayr’s Triple-Flute Downcut family is intended for hard plastics and finish passes on solid wood. Downward axial cutting action can help control the top edge of the workpiece, while three cutting flutes distribute engagement for consistent finish machining when feed, speed, and chip evacuation are correctly managed.
The current Royce Ayr online series does not publish this legacy/special metric SKU or an overall-length value. Selection must therefore remain based on the verified 20 mm diameter, 102 mm cutting edge, 20 mm shank, Z3 downcut finishing geometry, HW solid-carbide construction, and right-hand rotation; overall length must be confirmed from the physical tool or Royce Ayr before setup.
Technical Specifications
Triple-Flute Downcut Finisher R59-01015
- Royce Ayr
- Triple-Flute Downcut Finishing Router Bit
- R59-01015
- Triple-Flute Downcut / R59-010
- BSP SC Down Cut D20 × CL102 × Sk20 Z3 Finisher
- 20 mm (0.7874 in.)
- 102 mm (4.0157 in.)
- 20 mm (0.7874 in.)
- Not published in available records
- 3
- Continuous-Edge Finisher
- Downcut
- Rotation: RH / Right Hand · Construction: HW / Solid Carbide · Published Family Materials: Solid Wood, Hard Plastics, Fibreboard, and Laminated Materials · Machine Type: Compatible CNC Router
- Designed for compatible CNC routers using an exact 20 mm precision collet or approved 20 mm toolholding system. Confirm tool projection, spindle clearance, workholding, and cutting parameters before use.
Best Fit Applications
Solid-Wood Finish Passes
Hard-Plastic Routing
Fibreboard Machining
Laminated-Material Routing
Deep Profile Finishing
Product Highlights
102 mm Cutting Envelope
The verified long cutting edge supports deep finishing work when projection, collet grip, machine clearance, and workholding are appropriate for the operation.
Downcut Surface Control
Downward axial cutting action can help control the top edge of compatible workpieces while directing chips downward through the cut.
Compatibility & Installation Notes
Confirm SKU R59-01015, the exact 20 mm shank, actual overall length, safe clamping length, tool projection, right-hand spindle rotation, collet condition, machine clearance, spoilboard clearance, and workholding before installation. Because no overall length is published in the available source records, measure the physical tool or obtain written Royce Ayr confirmation before programming depth or clearance. Establish spindle speed, feed rate, and pass depth for the machine, material, extraction, and finishing application.
Control Deep-Cut Finishing Quality
The Royce Ayr Triple-Flute Downcut Finishing Router Bit R59-01015 combines a 20 mm solid-carbide body, 102 mm cutting edge, 20 mm shank, and three-flute downcut geometry for demanding CNC finishing work.
Continuous finishing edges and downward axial cutting action support controlled surface results when the tool is correctly held and all clearance-critical dimensions are verified before machining.