Production Cutting Geometry
The cutting geometry is matched to the exact Royce Ayr family and intended application.
Royce Ayr 6-Flute Solid Carbide Composite Router — D 1/4" – Cut 7/8" – Shank 1/4" – Overall Length 2-1/2"
CA$999.99
Out of stock
SKU
R67-58610EM
Product Type
6-Flute Solid-Carbide Composite Router
Series / Family
R67 · Composite Router Tool
Diameter
1/4 in
Cutting Edge
7/8 in
Shank
1/4 in
Overall Length
2-1/2 in
Cutting Edges
6
Rotation
RH / Right Hand
Cutting Material
Solid Carbide
6-Flute Solid-Carbide
Composite Router
6-Flute Solid-Carbide Composite Router
Royce Ayr 6-Flute Solid-Carbide Composite Router — D 1/4 in · CE 7/8 in · Sh 1/4 in · OA 2-1/2 in. Exact production data is tied to SKU R67-58610EM; stale legacy/private-label wording has been replaced where current Royce Ayr or verified catalogue data provides a stronger source.
1/4 inCutting Diameter
7/8 inCutting Edge
1/4 inShank
2-1/2 inOverall Length
6-Flute Solid-Carbide Composite Router
Verified Royce Ayr configuration for industrial woodworking, CNC routing, boring, panel processing, or tooling service as applicable to this exact SKU.
HW / Carbide6 FluteRH / Right HandSKU R67-58610EM
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/4 in shank. Verify collet condition, projection, rotation and machine limits before use.
Main Product Description
The Royce Ayr 6-Flute Solid-Carbide Composite Router R67-58610EM is configured for production CNC routing with cutting diameter 1/4 in, cutting edge 7/8 in, shank 1/4 in, overall length 2-1/2 in.
The verified 6-flute composite-routing geometry geometry and 6-flute cutting configuration are matched to phenolic and reinforced composite materials. The geometry is intended to balance chip formation, edge quality and tool rigidity in the stated application family.
Maintain clean, concentric toolholding and minimize unsupported projection. Establish spindle speed, feed rate and depth-per-pass for the workpiece, machine power, workholding and tool diameter rather than transferring settings from a different cutter.
Technical Specifications
R67 · Composite Router Tool · R67-58610EM
- Royce Ayr
- 6-Flute Solid-Carbide Composite Router
- R67-58610EM
- R67 · Composite Router Tool
- Solid Carbide
- 1/4 in
- 7/8 in
- 1/4 in
- 2-1/2 in
- 6
- RH / Right Hand
- 6-flute composite-routing geometry
- Coating: Uncoated / Standard · Material Compatibility: Phenolic and Reinforced Composite Materials
- Designed for compatible CNC routers and production toolholding systems accepting the exact 1/4 in shank. Verify collet condition, projection, rotation and machine limits before use.
Best Fit Applications
Phenolic & Composite Routing
Panel Profiling
Slotting & Pocketing
CNC Contour Cutting
Production Panel Machining
Product Highlights
Solid-Carbide Construction
Solid-carbide cutting construction supports wear resistance and dimensional stability.
Exact SKU Control
Key dimensions, rotation and flute count remain tied to the submitted commerce SKU.
Compatibility & Installation Notes
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/4 in shank. Verify collet condition, projection, rotation and machine limits before use. Confirm exact dimensions, rotation, cutting geometry, coating designation and compatible machine/tool body before installation. Do not substitute an adjacent Royce Ayr row merely because one or more dimensions appear similar.
Build Repeatable Production Accuracy
The Royce Ayr 6-Flute Solid-Carbide Composite Router R67-58610EM preserves the verified identity and production geometry required for accurate tooling selection. D 1/4 in · CE 7/8 in · Sh 1/4 in · OA 2-1/2 in.
Use the exact verified SKU and setup data, inspect the tooling and holder before production, and establish operating parameters for the actual machine, workpiece and workholding conditions.