Downcut Surface Control
Downcut geometry directs cutting force toward the work surface to support controlled top-edge quality.
Royce Ayr 2 Flute Downcut Chipbreaker Finisher — D 1/2" – Cut 1-7/8" – Shank 1/2" – Overall Length 4"
CA$999.99
Out of stock
SKU
R60-31004
Product Type
2 Flute Downcut Chipbreaker Finisher
Series / Family
2 Flute Downcut Chipbreaker Finisher
Diameter
1/2 in
Cutting Edge
1-7/8 in
Shank
1/2 in
Overall Length
4 in
Cutting Edges
2
Rotation
RH / Right Hand
Cutting Material
Solid Carbide
2 Flute
Downcut Chipbreaker Finisher
2 Flute Downcut Chipbreaker Finisher
Royce Ayr 2 Flute Downcut Chipbreaker Finisher — D 1/2 in · CE 1-7/8 in · Sh 1/2 in · OA 4 in. Exact production data is tied to SKU R60-31004; stale legacy/private-label wording has been replaced where current Royce Ayr or verified catalogue data provides a stronger source.
1/2 inCutting Diameter
1-7/8 inCutting Edge
1/2 inShank
4 inOverall Length
2 Flute Downcut Chipbreaker Finisher
Verified Royce Ayr configuration for industrial woodworking, CNC routing, boring, panel processing, or tooling service as applicable to this exact SKU.
HW / Carbide2 FluteRH / Right HandSKU R60-31004
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use.
Main Product Description
The Royce Ayr 2 Flute Downcut Chipbreaker Finisher R60-31004 is configured for production CNC routing with cutting diameter 1/2 in, cutting edge 1-7/8 in, shank 1/2 in, overall length 4 in.
The verified 2 flute downcut chipbreaker finisher geometry and 2-flute cutting configuration are matched to phenolic and reinforced composite materials. The geometry is intended to balance chip formation, edge quality and tool rigidity in the stated application family.
Maintain clean, concentric toolholding and minimize unsupported projection. Establish spindle speed, feed rate and depth-per-pass for the workpiece, machine power, workholding and tool diameter rather than transferring settings from a different cutter.
Technical Specifications
2 Flute Downcut Chipbreaker Finisher · R60-31004
- Royce Ayr
- 2 Flute Downcut Chipbreaker Finisher
- R60-31004
- 2 Flute Downcut Chipbreaker Finisher
- Solid Carbide
- 1/2 in
- 1-7/8 in
- 1/2 in
- 4 in
- 2
- RH / Right Hand
- 2 Flute Downcut Chipbreaker Finisher
- Coating: Uncoated / Standard · Material Compatibility: Phenolic and Reinforced Composite Materials
- Designed for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use.
Best Fit Applications
Production Roughing
Wood Composite Routing
Laminated Panel Machining
Deep Profiling
High-Removal CNC Routing
Product Highlights
Solid-Carbide Construction
Solid-carbide cutting construction supports edge retention and dimensional control in production routing.
Exact SKU Geometry
The published diameter, cutting length, shank, flute count and overall length are preserved for this exact tool.
Compatibility & Installation Notes
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use. Confirm exact dimensions, rotation, cutting geometry, coating designation and compatible machine/tool body before installation. Do not substitute an adjacent Royce Ayr row merely because one or more dimensions appear similar.
Build Repeatable Production Accuracy
The Royce Ayr 2 Flute Downcut Chipbreaker Finisher R60-31004 preserves the verified identity and production geometry required for accurate tooling selection. D 1/2 in · CE 1-7/8 in · Sh 1/2 in · OA 4 in.
Use the exact verified SKU and setup data, inspect the tooling and holder before production, and establish operating parameters for the actual machine, workpiece and workholding conditions.