Compression Edge Control
Upward and downward shearing action helps reduce chipping on the top and bottom faces of compatible laminated and veneered panels.
Royce Ayr 2 Flute Compression Spiral Router Bit 1/2" (12.7mm) – Right-Hand
CA$999.99
In stock
SKU
R60-11404
Product Type
2 Flute Compression Spiral Router Bit
Series
Double Flute Compression / R60-114 Series
Cutting Diameter
1/2 in (12.7 mm)
Cutting Edge
1-3/8 in (34.93 mm)
Upcut Length
5/8 in (15.88 mm)
Shank
1/2 in (12.7 mm)
Overall Length
3-1/2 in (88.9 mm)
Flutes
2
Rotation
Right-Hand (RH)
Material
HW
Coating
None
Application
Laminated,Veneered and Wood Composite Panel Routing
2-Flute
Compression
Spiral Router Bit
A solid-carbide compression spiral router bit for CNC routing laminated or veneered wood and wood composites where clean top and bottom edge finish is critical. Its 1/2-inch cutting diameter, 1-3/8-inch cutting edge, 5/8-inch upcut section, 1/2-inch shank, and 3-1/2-inch overall length suit extended production panel-routing applications.
D=1/2 in12.7 mm Diameter
CE=1-3/8 in34.93 mm Cutting Edge
Up=5/8 in15.88 mm Upcut
OAL=3-1/2 in88.9 mm Overall Length
Compression Router Bit
This production tool combines solid-carbide construction, two compression flutes, and right-hand rotation to help control chipping on both faces of compatible laminated, veneered, and composite panels.
Solid Carbide2 FlutesRight-HandSKU R60-11404
Designed for compatible CNC routers using precision 1/2-inch collets or approved toolholding systems. Match the 5/8-inch upcut section and 1-3/8-inch cutting edge to the panel thickness and programmed cutting depth.
Main Product Description
The Royce Ayr 2-Flute Compression Spiral Router Bit R60-11404 is engineered for CNC routing laminated or veneered wood and wood composite panels where both the top and bottom surfaces require controlled edge quality. Its compression geometry combines upward and downward shearing action to help reduce chipping on both faces of the material.
The tool features a 0.5000-inch cutting diameter, 1.375-inch cutting edge, 0.625-inch upcut section, 0.500-inch shank, two flutes, right-hand rotation, no coating, and a 3.500-inch overall length. This extended configuration is suited to compatible cabinet, millwork, sheet-good, and general panel-processing applications.
Solid-carbide construction supports rigidity, dimensional consistency, and cutting-edge retention in production routing. Correct collet condition, tool projection, spindle speed, feed rate, material thickness, hold-down, and depth-per-pass are essential for maintaining finish quality and tool life.
Technical Specifications
Compression Router Bit R60-11404
- Royce Ayr
- 2-Flute Compression Spiral Router Bit
- R60-11404
- R60-114 Double Flute Compression
- Solid Carbide / Precision CNC Tooling
- 0.5000 in / 1/2 in (12.7 mm)
- 1.375 in / 1-3/8 in (34.93 mm)
- 0.500 in / 1/2 in (12.7 mm)
- 3.500 in / 3-1/2 in (88.9 mm)
- 2
- RH / Right Hand
- HW / Solid Carbide Tooling · Uncoated
- Laminated Wood, Veneered Wood, and Wood Composites
- CNC Routers with Compatible 1/2-Inch Collets or Toolholders
Best Fit Applications
Laminated Panel Routing
Veneered Panel Routing
Wood Composite Machining
Cabinet & Millwork Production
Sheet-Good Profile Cutting
Product Highlights
Extended Cutting Edge
The 1-3/8-inch cutting edge supports compatible panel-routing applications requiring more cutting length than shorter R60-114 sizes.
Verified Upcut Section
The 5/8-inch upcut length can be matched carefully to panel thickness and programmed cutting depth for correct compression engagement.
Compatibility & Installation Notes
Confirm that the CNC router spindle, collet, and toolholder accept an exact 1/2-inch (12.7 mm) shank. Verify right-hand rotation, tool projection, runout, available clearance, guarding, dust extraction, hold-down, RPM, feed rate, pass depth, and material thickness before machining. Compression tools must be positioned so the 5/8-inch upcut section and remaining downcut geometry engage the workpiece correctly; confirm that the 1-3/8-inch cutting edge suits the panel and programmed cutting depth.
Extended Two-Sided Panel Routing
The Royce Ayr 2-Flute Compression Spiral Router Bit R60-11404 provides a solid-carbide solution for CNC routing laminated, veneered, and composite panels where clean top and bottom edge quality is required. Its 1/2-inch diameter, 1-3/8-inch cutting edge, 5/8-inch upcut section, 1/2-inch shank, and 3-1/2-inch overall length support extended production-routing applications.
Two-flute compression geometry and right-hand rotation support controlled panel machining when the tool is correctly held, positioned through the material, and operated within suitable machining parameters.