Production Cutting Geometry
The cutting geometry is matched to the exact Royce Ayr family and intended application.
Royce Ayr 2 Flute Straight General Purpose — D 3/16" – Cut 5/8" – Shank 1/4" – Overall Length 4"
CA$999.99
Out of stock
SKU
R56-01805
Product Type
2 Flute Straight General Purpose
Series / Family
2 Flute Straight General Purpose
Diameter
3/16 in
Cutting Edge
5/8 in
Shank
1/4 in
Overall Length
4 in
Cutting Edges
2
Rotation
RH / Right Hand
Cutting Material
Solid Carbide
2 Flute
Straight General Purpose
2 Flute Straight General Purpose
Royce Ayr 2 Flute Straight General Purpose — D 3/16 in · CE 5/8 in · Sh 1/4 in · OA 4 in. Exact production data is tied to SKU R56-01805; stale legacy/private-label wording has been replaced where current Royce Ayr or verified catalogue data provides a stronger source.
3/16 inCutting Diameter
5/8 inCutting Edge
1/4 inShank
4 inOverall Length
2 Flute Straight General Purpose
Verified Royce Ayr configuration for industrial woodworking, CNC routing, boring, panel processing, or tooling service as applicable to this exact SKU.
HW / Carbide2 FluteRH / Right HandSKU R56-01805
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/4 in shank. Verify collet condition, projection, rotation and machine limits before use.
Main Product Description
The Royce Ayr 2 Flute Straight General Purpose R56-01805 is configured for production CNC routing with cutting diameter 3/16 in, cutting edge 5/8 in, shank 1/4 in, overall length 4 in.
The verified 2 flute straight general purpose geometry and 2-flute cutting configuration are matched to phenolic and reinforced composite materials. The geometry is intended to balance chip formation, edge quality and tool rigidity in the stated application family.
Maintain clean, concentric toolholding and minimize unsupported projection. Establish spindle speed, feed rate and depth-per-pass for the workpiece, machine power, workholding and tool diameter rather than transferring settings from a different cutter.
Technical Specifications
2 Flute Straight General Purpose · R56-01805
- Royce Ayr
- 2 Flute Straight General Purpose
- R56-01805
- 2 Flute Straight General Purpose
- Solid Carbide
- 3/16 in
- 5/8 in
- 1/4 in
- 4 in
- 2
- RH / Right Hand
- 2 Flute Straight General Purpose
- Coating: Uncoated / Standard · Material Compatibility: Phenolic and Reinforced Composite Materials
- Designed for compatible CNC routers and production toolholding systems accepting the exact 1/4 in shank. Verify collet condition, projection, rotation and machine limits before use.
Best Fit Applications
Hard Plastic Routing
Plastic Sheet Profiling
Slotting & Pocketing
CNC Contour Cutting
Edge Finishing
Product Highlights
Solid-Carbide Construction
Solid-carbide cutting construction supports wear resistance and dimensional stability.
Exact SKU Control
Key dimensions, rotation and flute count remain tied to the submitted commerce SKU.
Compatibility & Installation Notes
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/4 in shank. Verify collet condition, projection, rotation and machine limits before use. Confirm exact dimensions, rotation, cutting geometry, coating designation and compatible machine/tool body before installation. Do not substitute an adjacent Royce Ayr row merely because one or more dimensions appear similar.
Build Repeatable Production Accuracy
The Royce Ayr 2 Flute Straight General Purpose R56-01805 preserves the verified identity and production geometry required for accurate tooling selection. D 3/16 in · CE 5/8 in · Sh 1/4 in · OA 4 in.
Use the exact verified SKU and setup data, inspect the tooling and holder before production, and establish operating parameters for the actual machine, workpiece and workholding conditions.