Serrated Roughing Geometry
Three serrated cutting flutes divide the cutting engagement to support productive stock removal with lower cutting demand than a comparable continuous finishing edge.
Royce Ayr High-Helix Solid Carbide Upcut Roughing Router Bit D20 × CL102 mm 3-Tooth Right-Hand
CA$999.99
Out of stock
SKU
R60-01715
Product Type
Solid-Carbide High-Helix Upcut Roughing Router Bit
Series
High-Helix Ripper Upcut / R60-017 Series
Cutting Diameter
20 mm (0.7874 in.)
Cutting Edge
102 mm (4.0157 in.)
Shank
20 mm (0.7874 in.)
Overall Length
Not published — verify physical tool
Flutes
3
Cutting Geometry
Serrated High-Helix Rougher
Cutting Direction
Upcut
Rotation
Right-Hand (RH)
Material
HW / Solid Carbide
Application
Deep Profiling and High-Volume Stock Removal
High-Helix Upcut Rougher
Router Bit
High-Helix Upcut Roughing Router Bit
Solid-carbide, right-hand, three-flute upcut roughing router bit with a 20 mm cutting diameter, 102 mm cutting edge, and 20 mm shank. The serrated high-helix geometry is intended for efficient stock removal and upward chip evacuation in demanding CNC routing work.
D=20 mmCutting Diameter
CE=102 mmCutting Edge
Sh=20 mmShank Diameter
Z=3Roughing Flutes
High-Helix Upcut Roughing Router Bit
A long-cut solid-carbide roughing tool combining three serrated cutting flutes with upcut chip flow for productive material removal in compatible CNC routing systems.
Solid CarbideZ3 RougherUpcut · RHSKU R60-01715
Designed for compatible CNC routers using an exact 20 mm precision collet or approved 20 mm toolholding system. Confirm projection, spindle limits, feed strategy, and workholding before use.
Main Product Description
The Royce Ayr High-Helix Upcut Roughing Router Bit R60-01715 is identified in Titan’s catalogue as a 20 mm-diameter solid-carbide upcut rougher with a 102 mm cutting edge, 20 mm shank, and three-flute geometry. This long cutting envelope is intended for deep profiling and high-volume stock removal where adequate machine clearance and rigid workholding are available.
Its serrated high-helix cutting geometry breaks the cutting load into smaller engagements, reducing the horsepower demand compared with a continuous-edge finishing tool of similar size. The upcut helix directs chips toward the toolholder side of the cut to support evacuation from deep channels and profiles.
The current Royce Ayr online series does not publish this legacy/special metric SKU or an overall-length value. Selection must therefore be based on the verified 20 mm diameter, 102 mm cutting edge, 20 mm shank, Z3 roughing geometry, and right-hand rotation; overall length and safe clamping length must be confirmed from the physical tool or Royce Ayr before setup.
Technical Specifications
High-Helix Upcut Rougher R60-01715
- Royce Ayr
- High-Helix Upcut Roughing Router Bit
- R60-01715
- Solid Carbide / Precision CNC Geometry
- BSP SC Up Cut D20 × CL102 × Sk20 Z3 Rougher
- 20 mm (0.7874 in.)
- 102 mm (4.0157 in.)
- 20 mm (0.7874 in.)
- Not published in available records
- 3
- Serrated High-Helix Rougher
- Upcut
- Rotation: RH / Right Hand · Construction: HW / Solid Carbide · Published Series Materials: Hardwood, Softwood, Fibreboard, and Plywood · Machine Interface: Compatible CNC Routers with Exact 20 mm Toolholding
- Designed for compatible CNC routers using an exact 20 mm precision collet or approved 20 mm toolholding system. Confirm projection, spindle limits, feed strategy, and workholding before use.
Best Fit Applications
Deep Profile Roughing
Solid-Wood Stock Removal
Fibreboard Machining
Plywood Component Routing
Construction and Millwork Parts
Product Highlights
102 mm Cutting Envelope
The long published cutting edge supports deep routing work when the machine, toolholder, projection, workholding, and programmed passes are appropriate for the application.
Upcut Chip Evacuation
The high-helix upcut design carries chips upward from deep profiles and channels, helping prevent recutting when extraction and machine conditions are properly managed.
Compatibility & Installation Notes
Confirm SKU R60-01715, the exact 20 mm shank, actual overall length, safe clamping length, tool projection, right-hand spindle rotation, collet condition, and machine clearance before installation. Because no overall length is published in the available source records, measure the physical tool or obtain written Royce Ayr confirmation before programming depth or clearance. Establish spindle speed, feed rate, and pass depth for the machine, material, workholding, extraction, and roughing application.
Increase Deep-Cut Roughing Productivity
The Royce Ayr High-Helix Upcut Roughing Router Bit R60-01715 combines a 20 mm solid-carbide body, 102 mm cutting edge, 20 mm shank, and three-flute serrated high-helix geometry for demanding CNC stock-removal work.
Upcut chip flow and interrupted roughing edges support efficient evacuation and reduced cutting demand, while final operating parameters and all clearance-critical dimensions must be verified for the specific machine and physical tool.