Production Cutting Geometry
The cutting geometry is matched to the exact Royce Ayr family and intended application.
Royce Ayr 1-Tooth Carbide Insert Corner-Clean / Profile Tool Body — 26mm – Shank 3/4" – Overall Length 90mm
CA$999.99
In stock
SKU
562SC.026-1W
Product Type
Z1 HW Insert Corner-Clean / Profile Tool Body
Series / Family
562SC · Corner-Clean / Profile Tool Body
Diameter
26 mm
Shank
3/4 in
Overall Length
90 mm
Cutting Edges
1
Rotation
RH / Right Hand
Cutting Material
HW / Carbide Insert System
Z1 HW Insert Corner-Clean
/ Profile Tool Body
Z1 HW Insert Corner-Clean / Profile Tool Body
Royce Ayr Z1 HW Insert Corner-Clean / Profile Tool Body — D 26 mm · Sh 3/4 in · OA 90 mm. Exact production data is tied to SKU 562SC.026-1W; stale legacy/private-label wording has been replaced where current Royce Ayr or verified catalogue data provides a stronger source.
26 mmCutting Diameter
3/4 inShank
90 mmOverall Length
Z=1Cutting Edges
Z1 HW Insert Corner-Clean / Profile Tool Body
Verified Royce Ayr configuration for industrial woodworking, CNC routing, boring, panel processing, or tooling service as applicable to this exact SKU.
HW / Carbide1 FluteRH / Right HandSKU 562SC.026-1W
Designed for compatible CNC routers and production toolholding systems accepting the exact 3/4 in shank. Verify collet condition, projection, rotation and machine limits before use.
Main Product Description
The Royce Ayr Z1 HW Insert Corner-Clean / Profile Tool Body 562SC.026-1W is configured for production CNC routing with cutting diameter 26 mm, shank 3/4 in, overall length 90 mm.
The verified indexable corner-clean / profile body · profiles a–h geometry and 1-flute cutting configuration are matched to depends on compatible royce ayr tool body. The steel body accepts the verified HW profile inserts; the tool body does not itself establish an insert profile until the correct knife is installed.
Maintain clean, concentric toolholding and minimize unsupported projection. Establish spindle speed, feed rate and depth-per-pass for the workpiece, machine power, workholding and tool diameter rather than transferring settings from a different cutter.
Technical Specifications
562SC · Corner-Clean / Profile Tool Body · 562SC.026-1W
- Royce Ayr
- Z1 HW Insert Corner-Clean / Profile Tool Body
- 562SC.026-1W
- 562SC · Corner-Clean / Profile Tool Body
- HW / Carbide Insert System
- 26 mm
- 3/4 in
- 90 mm
- 1
- RH / Right Hand
- Indexable corner-clean / profile body · profiles A–H
- Uncoated / Standard
- Material Compatibility: Depends on Compatible Royce Ayr Tool Body
- Designed for compatible CNC routers and production toolholding systems accepting the exact 3/4 in shank. Verify collet condition, projection, rotation and machine limits before use.
Best Fit Applications
Indexable Cutterheads
Replacement Cutting Edges
Profiling Tool Service
Production Tool Maintenance
Carbide Insert Replacement
Product Highlights
Solid-Carbide Construction
Solid-carbide cutting construction supports wear resistance and dimensional stability.
Exact SKU Control
Key dimensions, rotation and flute count remain tied to the submitted commerce SKU.
Compatibility & Installation Notes
Designed for compatible CNC routers and production toolholding systems accepting the exact 3/4 in shank. Verify collet condition, projection, rotation and machine limits before use. Confirm exact dimensions, rotation, cutting geometry, coating designation and compatible machine/tool body before installation. Do not substitute an adjacent Royce Ayr row merely because one or more dimensions appear similar.
Build Repeatable Production Accuracy
The Royce Ayr Z1 HW Insert Corner-Clean / Profile Tool Body 562SC.026-1W preserves the verified identity and production geometry required for accurate tooling selection. D 26 mm · Sh 3/4 in · OA 90 mm.
Use the exact verified SKU and setup data, inspect the tooling and holder before production, and establish operating parameters for the actual machine, workpiece and workholding conditions.