Compact Straight-Flute Format
The 1/4-inch cutter and 7/8-inch cutting edge provide a compact format for controlled routing, trimming, slotting, and small-profile work.
Royce Ayr 2-Flute Straight Wood & Plastic Router Bit 1/4" (6.35mm)
CA$999.99
In stock
SKU
R56-21105
Product Type
2-Flute Straight Router Bit
Diameter
1/4 in (6.35 mm)
Cutting Edge
7/8 in (22.23 mm)
Shank
1/4 in (6.35 mm)
Overall Length
2-1/2 in (63.5 mm)
Rotation
Right-Hand (RH)
Material
HW
Coating
None
Application
Solid Wood Routing,Hard Plastic Routing,Light Slotting,Trimming,Profile Routing
2-Flute
Straight
Wood & Plastic Router Bit
Royce Ayr R56-21105 is a 2-flute straight router bit for general-purpose routing in solid wood and hard plastic. It features a 1/4 in cutting diameter, 7/8 in cutting edge, 1/4 in shank, 2-1/2 in overall length, right-hand rotation, HW cutting material, and no coating.
0.2500 in / 1/4 inCutting Diameter
0.875 in / 7/8 inCutting Edge
0.250 in / 1/4 inShank
2.500 in / 2-1/2 inOverall Length
Straight-Flute Router Bit
Royce Ayr R56-21105 is a 2-flute straight router bit for general-purpose routing in solid wood and hard plastic. It features a 1/4 in cutting diameter, 7/8 in cutting edge, 1/4 in shank, 2-1/2 in overall length, right-hand rotation, HW cutting material, and no coating.
HW Cutting Material2 FlutesRH RotationSKU R56-21105
Not specified by source; confirm machine spindle/router and 1/4 in collet compatibility before use.
Main Product Description
The Royce Ayr R56-21105 is a straight-flute router bit designed for clean, general-purpose routing work in solid wood and hard plastic. Its 1/4 in diameter makes it suitable for smaller profile, slotting, trimming, and routing operations where a compact cutter size is required and the machine setup accepts a 1/4 in shank.
With a 7/8 in cutting edge and 2-1/2 in overall length, this tool is intended for controlled-depth routing rather than heavy extended-reach machining. The 2-flute straight geometry gives shops a practical option for conventional routing applications where straight flute cutting action is preferred over spiral chip direction control.
For cabinet shops, millwork operations, plastics fabricators, and woodworking departments, R56-21105 is a practical utility cutter for everyday routing tasks in compatible materials. Final suitability should always be confirmed against the machine, collet, feed setup, material, cutting depth, and rotation direction before production use.
Technical Specifications
Straight-Flute Bit R56-21105
- Royce Ayr
- 2-Flute Straight Router Bit
- R56-21105
- 2 Flute Straight Wood & Plastic
- Not Specified by Supplied Source
- 0.2500 in / 1/4 in
- 0.875 in / 7/8 in
- 0.250 in / 1/4 in
- 2.500 in / 2-1/2 in
- 2
- RH
- HW · Uncoated
- General-purpose routing of solid wood and hard plastic
- Not specified by source; confirm machine spindle/router and 1/4 in collet compatibility before use.
Best Fit Applications
General-purpose CNC or router-table routing
Solid wood routing
Hard plastic routing
Light slotting and trimming applications
Small-diameter profile or edge routing where a 1/4 in cutter is required
Product Highlights
Two-Flute RH Geometry
The verified two-flute straight geometry uses right-hand rotation for conventional routing in compatible wood and hard-plastic applications.
General-Purpose Material Scope
Royce Ayr lists this SKU for general-purpose routing of solid wood and hard plastic.
Compatibility & Selection Notes
Before ordering or installing this tool, confirm the machine interface, collet size, shank fit, rotation direction, spindle speed/RPM range, feed speed, cutting depth, tool projection, material suitability, guarding, dust/chip extraction, and available clearance. Do not assume compatibility based only on diameter; verify that the router, CNC spindle, toolholder, or collet system is correct for a 1/4 in shank and right-hand rotation tool.
Compact General-Purpose Routing
The Royce Ayr R56-21105 is a 1/4 in 2-flute straight router bit for general-purpose routing in solid wood and hard plastic. With a 7/8 in cutting edge, 1/4 in shank, and 2-1/2 in overall length, it is a compact utility cutter for controlled routing, trimming, slotting, and small-profile work in compatible woodworking and plastics applications.
Built with HW cutting material, right-hand rotation, and an uncoated straight-flute design, R56-21105 is suited for shops that need a practical straight router bit for everyday production and setup work. Confirm collet size, rotation, feed rate, RPM, cutting depth, and material compatibility before use.