Exact Variant Identity
The exact SKU FPS3009001 is kept separate from neighbouring LAMELLO 3 / FPS3009 variants, including hand, dimensions and geometry.
Microtech LAMELLO 3 Diamond Clamex P-System Cutter 10mm 1-Tooth Right-Hand
CA$999.99
Out of stock
SKU
FPS3009001
Product Type
PCD Clamex P-System Cutter
Family
LAMELLO 3 / FPS3009
Diameter
10 mm
Useful Length
18 mm
Shank / Total
12 mm shank · 78 mm total
Cutting Geometry
Z1 · 0° axial
Cutting Material
PCD / DIA
Rotation
DX / RH
LAMELLO 3 PCD P-System Cutter
Z1 · RH
PCD Lamello Clamex P-System Cutter
Microtech LAMELLO 3 PCD shank cutter for Lamello Clamex P-System machining, with a 10 mm diameter, 18 mm useful length, 12 mm shank, Z1 geometry and right-hand rotation.
10 mmDiameter
18 mmUseful Length
Z1Cutting Geometry
DX / RHRotation
PCD Lamello Clamex P-System Cutter
Microtech LAMELLO 3 / FPS3009 configuration using PCD / DIA cutting technology for Lamello Clamex P-System joint machining.
PCD / DIALAMELLO 3DX / RHZ1
Confirm 12 mm, DX / RH, clamping/projection, spindle or boring-head limits, programmed depth, and exact workpiece material before production use.
Main Product Description
Microtech FPS3009001 is the exact LAMELLO 3 / FPS3009 PCD shank cutter for Lamello Clamex P-System joint machining. The official row specifies a 10 mm diameter, 7.4 mm minimum diameter, 18 mm useful length, 12 mm shank, 50 mm shank length and 78 mm total length.
The cutter uses one effective PCD cutting edge, a 3 mm PCD tip height, 0° axial angle, heavy-density-metal body and right-hand rotation. The family is explicitly marked NO DRILL and carries a published maximum speed of 24,000 rpm.
Use the exact P-System geometry and verify machine, holder, projection and Lamello programming requirements before production.
Technical Specifications
LAMELLO 3 / FPS3009 · FPS3009001
- Microtech
- PCD Clamex P-System Shank Cutter
- FPS3009001
- LAMELLO 3 / FPS3009
- PCD / DIA
- 10 mm
- 7.4 mm
- 18 mm
- 12 mm
- 50 mm
- 78 mm
- 1
- Axial Angle: 0° · PCD Tip Height H: 3 mm · Drilling Capability: No Drill · Body Material: Heavy-density metal / HDM · Maximum Speed: 24,000 rpm · Rotation: DX / RH
- Confirm 12 mm, DX / RH, clamping/projection, spindle or boring-head limits, programmed depth, and exact workpiece material before production use.
Best Fit Applications
Lamello Clamex P-System
CNC Joinery Slots
MDF / HDF
Particleboard / Plywood
Solid Wood Joinery
Product Highlights
Verified Cutting Technology
The active cutting technology is PCD / DIA; the long-description image is routed accordingly without inferring material from the SKU prefix.
Application-Matched Geometry
The published configuration is presented for Lamello Clamex P-System joint machining without borrowing feed, speed or compatibility values from adjacent products.
Compatibility & Installation Notes
Verify the exact SKU FPS3009001, 12 mm, DX / RH, machine and holder or boring-head compatibility, clamping/projection, programmed depth, and workpiece material before use. Do not derive feed rate, spindle speed, chip load or toolpath settings from the SKU. Follow the machine, holder and current Microtech documentation.
LAMELLO 3 / FPS3009
SKU FPS3009001 identifies the PCD Lamello Clamex P-System Cutter configuration shown above, with its verified dimensions, cutting technology, geometry and hand preserved as independent product attributes.
Selection should be based on the exact Microtech configuration and machine interface rather than a neighbouring family row, visual similarity or SKU-pattern inference.