Type B1 Geometry
Identified for the Type B1 position in the applicable WhisperCut exchangeable-knife arrangement.
Leitz Whispercut Knife Type B1 6.7x14.2x4.3 Diamond
CA$999.99
In stock
SKU
091067
Product Type
2 Flute Straight General Purpose Router Bit
Diameter
1/2 in (12.7 mm)
Cutting Edge
1 in (25.4 mm)
Shank
1/2 in (12.7 mm)
Overall Length
3 in (76.2 mm)
Rotation
Right-Hand (RH)
Cutting Geometry
2 Flutes / Straight Flute
Construction
Solid Carbide Tooling Category
Application
Solid Wood Routing,MDF Routing,Some Plastics,Slotting,Dadoing,Profiling
Leitz WhisperCut SB6.7
Type B1 Exchangeable Knife
Matched Geometry for Compatible Jointing Cutterheads
A precision-matched DP/PCD spare knife for compatible Leitz WhisperCut jointing cutter systems. The SB6.7 Type B1 configuration provides the specified geometry required for its assigned position within the cutterhead’s exchangeable-knife arrangement.
SB6.7Knife Designation
Type B1Knife Type
6.7 × 14.2 × 4.3 mmVerified Dimensions
DP / PCDCutting Material
Matched Geometry for Compatible Jointing Cutterheads
This exchangeable knife belongs to the Leitz WhisperCut spare-knife program for panel-edge jointing systems. It is identified by the SB6.7 designation, Type B1 geometry, DP cutting material, and the exact 6.7 × 14.2 × 4.3 mm size.
LeitzWhisperCutDP / PCDSKU 091067
Correct matching is essential: verify the cutterhead’s documented knife type, arrangement, and seating position before replacement.
Main Product Description
The Leitz WhisperCut SB6.7 Type B1 is an exchangeable spare knife used within compatible WhisperCut jointing and milling cutter systems for panel-edge processing. Its geometry and dimensions are specific to the Type B1 position in the applicable cutterhead configuration.
Leitz identifies this component as an eroded DP spare knife designed for quick and straightforward knife replacement. The 6.7 × 14.2 × 4.3 mm dimensions and Type B1 profile must be matched exactly rather than substituted solely by general size or cutting-material description.
Within a correctly configured WhisperCut cutterhead, this component supports jointing applications on edgebanding and related panel-processing equipment. The complete cutter system is intended for machining raw, veneered, painted, and coated chipboard or fibreboard surfaces, including decorative papers, foils, HPL, and anti-fingerprint finishes.
Technical Specifications
WhisperCut SB6.7 · SKU 091067
- Leitz
- Exchangeable spare knife
- 091067
- WhisperCut
- WhisperCut-knife SB6.7
- B1
- 6.7 × 14.2 × 4.3 mm
- DP / polycrystalline diamond (PCD)
- 3
- Panel edge processing
- Applicable Leitz WhisperCut cutterheads specifying SB6.7 Type B1
- SB6.7
- WhisperCut Knife Replacement · Panel Edge Jointing · Edgebanding Systems
- Correct matching is essential: verify the cutterhead’s documented knife type, arrangement, and seating position before replacement.
Best Fit Applications
WhisperCut Knife Replacement
Panel Edge Jointing
Edgebanding Systems
Decorative Panel Surfaces
Raw, Veneered & Coated Fibreboard Panel Processing
Product Highlights
DP / PCD Cutting Material
Uses polycrystalline diamond cutting material as specified in the Leitz spare-knife catalogue.
Exchangeable Format
Part of Leitz’s eroded spare-knife system for direct replacement in a correctly matched cutterhead.
Verify Before Installation
Confirm that the existing Leitz WhisperCut cutterhead specifically requires the SB6.7 Type B1 knife with 6.7 × 14.2 × 4.3 mm dimensions and the matching catalog shape position. Verify the cutterhead model, knife arrangement, seating face, clamping components, rotation, allowable operating speed, machine guarding, and manufacturer service instructions. Do not substitute a B2, A1, A2, C1, C2, D1, D2, or full-width SB14 knife based only on similar dimensions or appearance.
Precision-Matched WhisperCut Spare Knife
Maintain the specified knife configuration of a compatible Leitz WhisperCut jointing cutterhead with the correctly matched SB6.7 Type B1 exchangeable knife. Measuring 6.7 × 14.2 × 4.3 mm and manufactured with DP/PCD cutting material, this component is intended for the designated Type B1 position within applicable WhisperCut panel-edge processing systems. Always match the knife by its complete designation, dimensions, geometry, and cutterhead documentation before replacement.
Use only where the documented Leitz WhisperCut cutterhead specifies the SB6.7 Type B1 geometry, dimensions, and DP/PCD cutting material.