Verified Klein Geometry
The defining dimensions and configuration are tied to the exact Klein item or documented Titan-to-Klein commerce mapping.
Klein Carbide Reversible Carbide Insert Knife — R2 — 14 × 14 × 2mm
CA$999.99
Out of stock
SKU
Z055.107.N
Product Type
HW Reversible Carbide Insert Knife — R2
Family / Category
Z055 · HW Replacement Inserts
Insert Size
14 × 14 × 2 mm
Radius
R=2 mm
Angle
30°
HW Grade
KCR05
Holes
1
Cutting Edges
4
HW Reversible Carbide Insert Knife — R2
Klein
Z055
Verified Klein tooling configuration for SKU Z055.107.N. Exact geometry, active cutting material, system fit and current manufacturer mapping are retained for production-grade woodworking and CNC selection.
14 × 14 × 2 mmInsert Size
HW / CarbideMaterial / Type
KleinVerified Tooling
KleinVerified Tooling
HW Reversible Carbide Insert Knife — R2
Exact Klein / SISTEMI industrial tooling identity with verified product-family geometry and material classification.
HW / CarbideZ0554SKU Z055.107.N
Install only in the listed compatible Klein W190/WE190/WG190 tool bodies. Clean the insert seat, inspect the clamping hardware and ensure the R2 insert is correctly seated before tightening.
Main Product Description
Klein Z055.107.N is the verified hw reversible carbide insert knife — r2 in the Z055 · HW Replacement Inserts family. Insert Size: 14 × 14 × 2 mm, Radius: R=2 mm, Angle: 30°, HW Grade: KCR05, Holes: 1.
The active cutting material is HW / Carbide. The geometry, rotation, tooth/flute arrangement and coating designation remain tied to this exact product record so adjacent sizes or variants are not mixed.
Maintain clean, concentric toolholding and verify the machine, material, workholding, guarding and operating parameters appropriate to the exact cutter or saw blade before production.
Technical Specifications
Z055 · HW Replacement Inserts
- Klein
- HW Reversible Carbide Insert Knife — R2
- Z055.107.N
- HW Replacement Inserts
- Z055 · HW Replacement Inserts
- HW / Carbide
- 14 × 14 × 2 mm
- R=2 mm
- 30°
- KCR05
- 1
- 4
- Compatible Tool Bodies: W190.100.RU / W190.101.RU / WE190.800.RU / WE190.635.RU / WG190.635.RU
- Install only in the listed compatible Klein W190/WE190/WG190 tool bodies. Clean the insert seat, inspect the clamping hardware and ensure the R2 insert is correctly seated before tightening.
Best Fit Applications
Plastic-Material Router Bodies
Indexable Tooling
Replacement Cutting Edges
CNC Routing
Tool Maintenance
Product Highlights
Carbide Cutting Performance
HW/solid-carbide cutting edges support production wear resistance and dimensional control.
Exact SKU Control
Diameter, width/length, rotation, tooth/flute count and system fit remain isolated from adjacent family variants.
Compatibility & Installation Notes
Install only in the listed compatible Klein W190/WE190/WG190 tool bodies. Clean the insert seat, inspect the clamping hardware and ensure the R2 insert is correctly seated before tightening. Do not substitute a neighboring Klein size, rotation, coating, adapter, blade, insert or service part merely because one or more dimensions appear similar.
Verified Klein Production Tooling
Klein Z055.107.N is catalogued here with the verified family, geometry, system fit and material classification needed for exact production-tool selection.
Maintain exact SKU control through purchasing, setup, replacement and service so the tooling configuration remains matched to the intended Klein / SISTEMI application.