Edge-Stable Paper Backing
Strong F-paper is used through the finer grit range for stable tracking and clean edge performance.
Hermes Abrasives BS 118 Abrasive Belt | 54x103 in | P 320 | Silicon Carbide
CA$999.99
Out of stock
SKU
SB54X103X320P
Product Form
Wide Abrasive Paper Belt
Hermes Type
BS 118
Dimensions
54 × 103 in (1371.6 × 2616.2 mm)
Grit
P 320
Abrasive Grain
Silicon Carbide
Backing
Combi / F-Paper
Bonding
Synthetic Resin,Antistatic
Coating
Closed
Application
Fine sanding of furniture parts before coating;lacquer sanding on wide-belt machines
BS 118 P320
Abrasive Belt
Wide Abrasive Paper Belt
Very edge-stable, antistatic silicon-carbide paper belt for fine sanding and lacquer sanding. This belt is sized 54 × 103 in (1371.6 × 2616.2 mm) in P 320.
BS 118Hermes Type
54 × 103 inBelt Size
P320Grit
Combi / F-PaperBacking
Wide Abrasive Paper Belt
Silicon Carbide abrasive belt with combi / f-paper backing and closed coating for industrial sanding applications.
Silicon CarbideCombi / F-PaperClosed CoatSKU SB54X103X320P
For sanding machines configured for a 54 × 103 in belt. Confirm belt direction, joint style, tension and tracking requirements for the machine before installation.
Main Product Description
BS 118 uses sharp silicon-carbide grain on a strong paper backing for a uniform, fine sanding pattern.
The antistatic construction helps reduce premature loading with sanding dust, while the closed coating supports consistent finishing.
This 54 × 103 in belt is supplied in P 320. Match the belt size, direction, joint, tension and tracking to the sanding machine before use.
Technical Specifications
BS 118 · P320
- Hermes Abrasives
- Wide Abrasive Paper Belt
- SB54X103X320P
- Industrial Sanding Belts
- Wide Abrasive Paper Belt
- BS 118
- 54 × 103 in (1371.6 × 2616.2 mm)
- P 320
- Silicon Carbide
- Synthetic Resin, Antistatic
- Combi / F-Paper
- Closed
- Primary Application: Fine sanding of furniture parts before coating; lacquer sanding on wide-belt machines
- For sanding machines configured for a 54 × 103 in belt. Confirm belt direction, joint style, tension and tracking requirements for the machine before installation.
Best Fit Applications
Furniture Fine Sanding
Lacquer Sanding
Hardwood Sanding
Softwood Sanding
Surface Finishing
Product Highlights
Antistatic Silicon Carbide
Sharp silicon-carbide grain combines high cutting efficiency with a fine, even sanding pattern.
P 320 · 54 × 103 in
Sized for wide-belt sanding equipment using a 54 × 103 in abrasive belt, with the grit clearly identified for sanding-sequence selection.
Compatibility & Installation Notes
Confirm belt width and length, direction marking, joint style, tension and tracking before installation. Check the platen or contact roller, dust extraction and sanding sequence, and use machine settings appropriate for the workpiece and abrasive grit.
Hermes Industrial Sanding Performance
Very edge-stable, antistatic silicon-carbide paper belt for fine sanding and lacquer sanding.
The P 320 grade and 54 × 103 in belt size make this configuration suitable for the sanding operations listed above when matched to the correct machine setup.