Verified 5 mm Z2 Variant
Exact Item Code 811.050.11 combines a 5 mm diameter, 15/32-inch cutting length, and 1/4-inch shank with two edges.
CMT Orange Tools Short-Series Straight Router Bit 5mm Diameter x 15/32-Inch Cutting Length x 1/4-Inch Shank
CA$999.99
In stock
SKU
811.050.11
Product Type
HWM Z2 Short-Series Straight Router Bit
Family / Series
CMT 7/8/911 Straight Router Bits,Short Series
Cutting Diameter
5 mm
Cutting Length
15/32 inch
Shank / Overall
1/4-inch shank · 2-inch overall length
Geometry
Z2 · Right-hand rotation
Cutting Material
HWM micrograin carbide
Construction
FATIGUE-PROOF® steel · Orange non-stick P.T.F.E.
Applications
Plywood,composites,and natural wood
HWM Z2
Short-Series Straight Router Bit
HWM Z2 Straight Bit
CMT 811.050.11 is the exact 5 mm Z2 variant in the 7/8/911 short-series straight-router-bit family. The verified USA and Canada row specifies a 5 mm cutting diameter, 15/32-inch cutting length, 2-inch overall length, 1/4-inch shank, two HWM cutting edges, and right-hand rotation.
5 mmCutting Diameter (D)
15/32 inCutting Length (I)
2 inOverall Length (L)
1/4 inShank Diameter (S)
HWM Z2 Straight Bit
A short-series straight router bit with two HWM micrograin-carbide cutting edges and right-hand rotation. The exact Item Code is 811.050.11; the family/series reference is 7/8/911.
CMT Orange ToolsHWM Micrograin CarbideShort Series1/4-Inch Shank
For compatible routers accepting a 1/4-inch shank and the exact dimensional format specified for Item Code 811.050.11. This cutting tool is intended for trained adult or professional operators using properly guarded compatible equipment.
Main Product Description
CMT 811.050.11 is one exact Item Code within the official 7/8/911 straight-router-bits, short-series family. The verified USA and Canada row specifies a 5 mm cutting diameter, 15/32-inch cutting length, 2-inch overall length, 1/4-inch shank, two cutting edges, HWM active cutting material, and right-hand rotation.
CMT describes the family with special FATIGUE-PROOF® steel, HWM micrograin carbide, and an orange non-stick P.T.F.E. coating. The exact 811.050.11 row is a Z2 configuration, so its double-edge geometry is the controlling item-specific specification.
CMT identifies plywood, composites, and natural wood as applications for the short-series family, with construction focused on precision, balance, concentricity, and chip removal. The 5 mm diameter and compact 15/32-inch cutting length are the primary identifiers for this specific variation.
Technical Specifications
Series 7/8/911 · SKU 811.050.11
- CMT Orange Tools
- HWM Z2 Short-Series Straight Router Bit
- 811.050.11
- 7/8/911 — Straight Router Bits, Short Series
- 5 mm
- 15/32 inch
- 2 inches
- 1/4 inch
- 2
- HWM Micrograin Carbide
- FATIGUE-PROOF® Steel
- Orange Non-Stick P.T.F.E.
- Rotation: Right-Hand (RH) · Verified Applications: Plywood, Composites, Natural Wood
- For compatible routers accepting a 1/4-inch shank and the exact dimensional format specified for Item Code 811.050.11. This cutting tool is intended for trained adult or professional operators using properly guarded compatible equipment.
Best Fit Applications
Plywood Processing
Composite Panel Processing
Natural Wood Processing
Short-Series Straight Profiles
Precision Production Routing
Product Highlights
HWM Micrograin Carbide
The exact product row identifies HWM active cutting material and Z2 right-hand geometry for this specific variation.
Short-Series Precision Construction
FATIGUE-PROOF® steel and orange non-stick P.T.F.E. coating support the family's precision, balance, and concentricity.
Compatibility & Safety Notes
This cutting tool is intended for trained adult or professional shop personnel using compatible, properly guarded machinery. Confirm exact Item Code 811.050.11, 1/4-inch shank compatibility, clearances, guarding, and applicable manufacturer limits against the router and CMT documentation. Do not select by the 7/8/911 family heading alone.
Verified 5 mm Short-Series Straight Routing in a Z2 Format
CMT 811.050.11 combines a 5 mm cutting diameter, 15/32-inch cutting length, 2-inch overall length, 1/4-inch shank, Z2 HWM micrograin-carbide geometry, and right-hand rotation.
The verified configuration belongs to CMT's 7/8/911 short-series family for plywood, composites, and natural wood, with exact variation data controlling product identification and compatibility.