Verified 1/2-Inch Z2 Variant
Exact Item Code 811.127.11 combines a 1/2-inch diameter, 3/4-inch cutting length, and 1/4-inch shank with two edges.
CMT Orange Tools Short-Series Straight Router Bit 1/2-Inch Diameter x 3/4-Inch Cutting Length x 1/4-Inch Shank
CA$999.99
In stock
SKU
811.127.11
Product Type
HW Z2 Short-Series Straight Router Bit
Family / Series
CMT 7/8/911 Straight Router Bits,Short Series
Cutting Diameter
1/2 inch
Cutting Length
3/4 inch
Shank / Overall
1/4-inch shank · 2-1/4-inch overall length
Geometry
Z2 · Right-hand rotation
Cutting Material
HW carbide
Construction
FATIGUE-PROOF® steel · Orange non-stick P.T.F.E.
Applications
Plywood,composites,and natural wood
HW Z2
Short-Series Straight Router Bit
HW Z2 Straight Bit
CMT 811.127.11 is the exact 1/2-inch Z2 variant in the 7/8/911 short-series straight-router-bit family. The verified USA and Canada row specifies a 1/2-inch cutting diameter, 3/4-inch cutting length, 2-1/4-inch overall length, 1/4-inch shank, two HW cutting edges, and right-hand rotation.
1/2 inCutting Diameter (D)
3/4 inCutting Length (I)
2-1/4 inOverall Length (L)
1/4 inShank Diameter (S)
HW Z2 Straight Bit
A short-series straight router bit with two HW carbide cutting edges and right-hand rotation. The exact Item Code is 811.127.11; the family/series reference is 7/8/911.
CMT Orange ToolsHW CarbideShort Series1/4-Inch Shank
For compatible routers accepting a 1/4-inch shank and the exact dimensional format specified for Item Code 811.127.11. This cutting tool is intended for trained adult or professional operators using properly guarded compatible equipment.
Main Product Description
CMT 811.127.11 is one exact Item Code within the official 7/8/911 straight-router-bits, short-series family. The verified USA and Canada row specifies a 1/2-inch cutting diameter, 3/4-inch cutting length, 2-1/4-inch overall length, 1/4-inch shank, two cutting edges, HW active cutting material, and right-hand rotation.
CMT describes the family with special FATIGUE-PROOF® steel, micrograin carbide, and an orange non-stick P.T.F.E. coating. The exact 811.127.11 row identifies HW material and Z2 geometry, so those item-specific fields control this variation.
CMT identifies plywood, composites, and natural wood as applications for the short-series family, with construction focused on precision, balance, concentricity, and chip removal. The 1/2-inch diameter and compact 3/4-inch cutting length are the primary identifiers for this specific variation.
Technical Specifications
Series 7/8/911 · SKU 811.127.11
- CMT Orange Tools
- HW Z2 Short-Series Straight Router Bit
- 811.127.11
- 7/8/911 — Straight Router Bits, Short Series
- 1/2 inch
- 3/4 inch
- 2-1/4 inches
- 1/4 inch
- 2
- HW Carbide
- FATIGUE-PROOF® Steel
- Orange Non-Stick P.T.F.E.
- Rotation: Right-Hand (RH) · Verified Applications: Plywood, Composites, Natural Wood
- For compatible routers accepting a 1/4-inch shank and the exact dimensional format specified for Item Code 811.127.11. This cutting tool is intended for trained adult or professional operators using properly guarded compatible equipment.
Best Fit Applications
Plywood Processing
Composite Panel Processing
Natural Wood Processing
Short-Series Straight Profiles
Precision Production Routing
Product Highlights
HW Carbide Cutting Material
The exact product row identifies HW active cutting material and Z2 right-hand geometry for this specific variation.
Short-Series Precision Construction
FATIGUE-PROOF® steel and orange non-stick P.T.F.E. coating support the family's precision, balance, and concentricity.
Compatibility & Safety Notes
This cutting tool is intended for trained adult or professional shop personnel using compatible, properly guarded machinery. Confirm exact Item Code 811.127.11, 1/4-inch shank compatibility, clearances, guarding, and applicable manufacturer limits against the router and CMT documentation. Do not select by the 7/8/911 family heading alone.
Verified 1/2-Inch Short-Series Straight Routing in an HW Z2 Format
CMT 811.127.11 combines a 1/2-inch cutting diameter, 3/4-inch cutting length, 2-1/4-inch overall length, 1/4-inch shank, Z2 HW carbide geometry, and right-hand rotation.
The verified configuration belongs to CMT's 7/8/911 short-series family for plywood, composites, and natural wood, with exact variation data controlling product identification and compatibility.