Verified 1/2-Inch Variant
Exact Item Code 812.628.11 combines a 1/2-inch diameter, 2-inch cutting length, and 1/2-inch shank.
CMT Orange Tools Carbide 2-Tooth Long-Series Straight Router Bit, 1/2" D x 2" Cut, 1/2" Shank
CA$999.99
In stock
SKU
812.628.11
Product Type
HW Straight Router Bit
Family / Series
CMT 7/8/912 Long Series
Cutting Diameter
1/2 inch · 12.70 mm
Cutting Length
2 inches · 50.80 mm
Overall Length
4-1/4 inches · 107.95 mm
Shank Diameter
1/2 inch · 12.70 mm
Geometry
Z2 · Right-Hand Rotation
Cutting Material
HW Micrograin Carbide
Surface Treatment
CMT Orange Non-Stick P.T.F.E. Coating
HW Z2
Straight Router Bit
HW Straight Bit
CMT 812.628.11 is the exact 1/2-inch cutting-diameter variant in the 7/8/912 long-series family. It combines a 2-inch cutting length, 4-1/4-inch overall length, 1/2-inch shank, two HW carbide cutting edges, and verified right-hand rotation for compatible routing in plywood, composites, and natural wood.
1/2 inCutting Diameter (D)
2 inCutting Length (I)
1/2 inShank Diameter (S)
Z2 · RHCutting Geometry
HW Straight Bit
A double-edge industrial straight router bit built with a fatigue-resistant steel body, micrograin carbide cutting edges, and CMT orange non-stick coating. The exact Item Code is 812.628.11; the family/series reference is 7/8/912.
CMT Orange ToolsHW Carbide1/2-Inch ShankSKU 812.628.11
Designed for compatible professional routing systems accepting a 1/2-inch shank and suitable for the published cutter dimensions. Equipment suitability and safe operating parameters must be determined from current manufacturer documentation.
Main Product Description
CMT 812.628.11 is one exact Item Code within the official 7/8/912 straight-router-bit long series. The verified row specifies a 1/2-inch cutting diameter, 2-inch cutting length, 4-1/4-inch overall length, 1/2-inch shank, two cutting edges, HW active cutting material, and right-hand rotation.
CMT describes the family as a double-edged industrial cutter made with fatigue-resistant steel and micrograin carbide. The trademark orange non-stick coating helps reduce resin, pitch, and residue buildup while the geometry supports swarf removal and consistent routing in compatible production work.
Official family guidance identifies plywood, composites, and natural wood for compatible industrial production. Final machine compatibility, tooling condition, workholding, guarding, extraction, and operating limits remain subject to current CMT and equipment-manufacturer documentation.
Technical Specifications
Series 7/8/912 · SKU 812.628.11
- CMT Orange Tools
- HW Straight Router Bit
- 812.628.11
- 7/8/912 — Straight Router Bits, Long Series
- 1/2 inch · 12.70 mm
- 2 inches · 50.80 mm
- 4-1/4 inches · 107.95 mm
- 1/2 inch · 12.70 mm
- 2
- HW Micrograin Carbide
- Right-Hand (RH)
- CMT Orange Non-Stick Coating
- Supported Materials: Plywood, Composites, Natural Wood
- Designed for compatible professional routing systems accepting a 1/2-inch shank and suitable for the published cutter dimensions. Equipment suitability and safe operating parameters must be determined from current manufacturer documentation.
Best Fit Applications
Straight Groove Routing
Plywood Machining
Composite Panel Routing
Natural Wood Routing
Compatible Production Routers
Product Highlights
HW Z2 Cutting Geometry
Two micrograin-carbide cutting edges provide the verified HW Z2 configuration with right-hand rotation.
Orange Non-Stick Coating
CMT’s orange surface treatment is specified for reduced resin, pitch, and residue accumulation on the tool body.
Compatibility & Installation Notes
Industrial router tooling must be selected, installed, inspected, and operated only by qualified adults following current CMT and machine-manufacturer documentation, facility safety procedures, guarding, PPE, and dust-control requirements. Confirm exact Item Code 812.628.11 and system compatibility through authoritative documentation; this product page is identification information, not an operating instruction.
Industrial Straight Routing in a Verified 1/2-Inch Format
CMT 812.628.11 combines a 1/2-inch diameter, 2-inch cutting length, 4-1/4-inch overall length, 1/2-inch shank, Z2 HW carbide geometry, and right-hand rotation.
The exact Item Code and published dimensions provide a clear basis for catalog identification and compatibility review within the CMT 7/8/912 long-series straight-bit family.