Verified 3/16-Inch Cutter
Exact Item Code 822.348.11 combines a 3/16-inch cutting width with a 1-7/8-inch diameter and 8 mm arbor bore.
CMT Orange Tools Carbide Three-Wing Slot Cutter, 1-7/8" D x 3/16" Cut, 8mm Bore
CA$999.99
In stock
SKU
822.348.11
Product Type
HW Three-Wing Slot Cutter
Family / Series
CMT 822
Cutting Width
3/16 inch · Approximately 4.8 mm
Body Thickness
0.114 inch · 2.9 mm
Cutter Diameter
1-7/8 inches · 47.63 mm
Arbor Bore
8 mm
Geometry
Z3 · Right-Hand · Anti-Kickback
Cutting Material
HW Tungsten Carbide-Tipped
Surface Treatment
CMT Orange P.T.F.E. Industrial Coating
HW Three-Wing
Slot Cutter
Three-Wing Slot Cutter
CMT 822.348.11 is the exact 3/16-inch cutting-width component in the official 822 slot-cutter family. The verified configuration combines a 1-7/8-inch diameter, 0.114-inch body thickness, 8 mm bore, three HW carbide cutting wings, right-hand rotation, anti-kickback geometry, and CMT orange P.T.F.E. Industrial Coating.
3/16 inCutting Width (I)
1-7/8 inCutter Diameter (D)
8 mmArbor Bore (B)
Z3 · RHCutting Geometry
Three-Wing Slot Cutter
A cutter-only HW component with three carbide-tipped wings, anti-kickback geometry, and CMT's orange P.T.F.E. Industrial Coating. The exact Item Code is 822.348.11; the family reference is 822. Compatible arbor and bearing components are separate.
CMT Orange ToolsHW Carbide-Tipped8 mm BoreSKU 822.348.11
Documented for compatible CMT 724-, 824-, and 924-series slot-cutter arbors that match the published 8 mm bore system. Installation and operation are reserved for qualified adult personnel following current CMT and equipment-manufacturer documentation.
Main Product Description
CMT 822.348.11 is one exact Item Code within the official 822 slot-cutter family. The verified configuration provides a 3/16-inch cutting width, 1-7/8-inch cutter diameter, 0.114-inch body thickness, 8 mm bore, three cutting wings, HW carbide active cutting material, and right-hand rotation.
CMT specifies three-wing tungsten-carbide-tipped construction, anti-kickback geometry, and its trademark orange P.T.F.E. Industrial Coating across this cutter family. The coating is a surface treatment and does not change the verified HW carbide material classification.
This Item Code identifies the cutter component rather than a complete shank-mounted assembly. CMT publishes compatible 724-, 824-, and 924-series arbor systems for the family's 8 mm bore. Final assembly, compatibility, and safe-use decisions belong to qualified adult personnel following current manufacturer documentation.
Technical Specifications
Series 822 · SKU 822.348.11
- CMT Orange Tools
- HW Three-Wing Slot Cutter
- 822.348.11
- 822 — Slot Cutters
- 3/16 inch · Approximately 4.8 mm
- 0.114 inch · 2.9 mm
- 1-7/8 inches · 47.63 mm
- 8 mm
- 3
- HW Tungsten Carbide-Tipped
- Right-Hand (RH)
- Anti-Kickback Three-Wing Design
- Surface Treatment: CMT Orange P.T.F.E. Industrial Coating · Compatible Arbor Families: CMT 724 · 824 · 924
- Documented for compatible CMT 724-, 824-, and 924-series slot-cutter arbors that match the published 8 mm bore system. Installation and operation are reserved for qualified adult personnel following current CMT and equipment-manufacturer documentation.
Best Fit Applications
Lateral Groove Profiles
Tongue-and-Groove Systems
Multi-Cutter Slotting Sets
CMT 822 Arbor Assemblies
Industrial Routing Systems
Product Highlights
HW Z3 Cutting Geometry
Three right-hand tungsten-carbide-tipped wings provide the verified HW Z3 configuration with anti-kickback geometry.
Industrial P.T.F.E. Coating
CMT specifies its trademark orange P.T.F.E. Industrial Coating as the surface treatment for this slot-cutter family.
Compatibility & Installation Notes
Industrial tooling component for qualified adult personnel. Item Code 822.348.11 is the cutter-only component with an 8 mm bore; a documented compatible CMT arbor and any required bearing or spacer components are separate. Installation and operation must follow current CMT and equipment-manufacturer documentation; no setup instructions are provided here.
Verified HW Z3 Slot-Cutting Geometry in a 3/16-Inch Format
CMT 822.348.11 combines a 3/16-inch cutting width, 1-7/8-inch diameter, 0.114-inch body thickness, 8 mm bore, Z3 HW carbide-tipped geometry, right-hand rotation, and CMT orange P.T.F.E. Industrial Coating.
Exact-code selection, arbor compatibility, and system suitability must be verified by qualified adult personnel using current CMT and equipment-manufacturer documentation.