Amana Tool Tru Point Insert-Carbide Roundover CNC System, 3/8-Inch Radius x 7/8-Inch Diameter x 3/8-Inch Cutting Height x 1/2-Inch Shank
Tru Point Insert Carbide
3/8-Inch Roundover CNC System
Amana Tool RC-1063 is the exact Tru Point roundover insert CNC router bit with a 3/8-inch radius, 7/8-inch diameter, 13/16-inch D1 dimension, 3/8-inch cutting height, 1/2-inch shank, 2-7/8-inch overall length, and solid-carbide replacement insert RCK-475.
Main Product Description
Amana Tool RC-1063 is the exact Tool No. shown on its dedicated official product page. The labelled specification block confirms a 7/8-inch diameter, 13/16-inch D1 dimension, 3/8-inch radius, 3/8-inch cutting height, 1/2-inch shank, 2-7/8-inch overall length, Roundover description, and replacement insert RCK-475.
Amana Tool specifies this Tru Point insert CNC system for lettering, engraving, signmaking, fluting, and decorative trimming. The exact page lists hardwood, softwood, MDF, plastic, and plywood as suitable workpiece materials.
The RCK-475 cutting component is officially identified as a solid-carbide 3/8-inch-radius insert for the Tru Point Roundover system. The service-parts table also identifies Torx screw 67110 and Torx key 5005. Amana Tool cautions that the very fine plunge point is not guaranteed against breakage.
Best Fit Applications
Product Highlights
Verified 3/8-Inch Roundover
Exact Tool No. RC-1063 combines a 3/8-inch radius with a 7/8-inch diameter, 13/16-inch D1, and 3/8-inch cutting height.
Replaceable Solid-Carbide Insert
Amana Tool identifies RCK-475 as the exact solid-carbide 3/8-inch-radius replacement insert for this Tru Point system.
Dedicated CNC Profiling System
The verified applications cover lettering, engraving, signmaking, fluting, and decorative trimming in five manufacturer-listed material groups.
Compatibility & Installation Notes
Confirm exact Tool No. RC-1063, a compatible 1/2-inch CNC collet, cutter clearance, workholding, guarding, and the official CNC Roundover Zero Point insert-carbide speed and feed chart. Match replacement insert RCK-475, Torx screw 67110, and Torx key 5005 by exact code. Amana Tool cautions that the very fine plunge point is not guaranteed against breakage. Follow all Amana Tool and machine-manufacturer safety documentation.
Tru Point Roundover Geometry with a Verified Solid-Carbide Insert
Amana Tool RC-1063 combines a 3/8-inch radius, 7/8-inch diameter, 13/16-inch D1, 3/8-inch cutting height, 1/2-inch shank, 2-7/8-inch overall length, and replaceable RCK-475 insert.
The exact official page supports lettering, engraving, signmaking, fluting, and decorative trimming in hardwood, softwood, MDF, plastic, and plywood.