Verified Fine-Detail Geometry
Exact Tool No. 45772 combines a 30-degree profile with a 0.010-inch tip width and 0.440-inch cutting height.
Amana Tool Solid Carbide 30° Engraving Router Bit with 0.010-Inch Tip x 1/4-Inch Shank x 2-1/4-Inch Overall Length
CA$999.99
Out of stock
SKU
45772
Product Type
Solid Carbide 30-Degree Engraving Router Bit
Family / Category
Solid Carbide Engraving Router Bits for Signmaking
Angle / Tip Width
30° · 0.010-inch tip width
Cutting Height
0.440 inch
Shank / Overall
1/4-inch shank · 2-1/4-inch overall length
Flute Geometry
Single-flute engraving profile
Cutting Material
Solid carbide
Maximum RPM
28,000 RPM
Applications
Extra-fine carving and lettering in wood,plastic,aluminum,and solid-surface materials
Solid Carbide Single Flute
30-Degree Engraving Router Bit
Engraving Router Bit
Amana Tool 45772 is the exact solid-carbide engraving router bit with a 30-degree angle, 0.010-inch tip width, 0.440-inch cutting height, 1/4-inch shank, 2-1/4-inch overall length, and a manufacturer-published maximum speed of 28,000 RPM for extra-fine carving and lettering details.
30°Angle (a°)
0.010 inTip Width (t)
0.440 inCutting Height (B)
28,000Maximum RPM
Engraving Router Bit
A solid-carbide, single-flute engraving bit for extra-fine carving and lettering. Its dedicated official page identifies the exact Tool No. as 45772 and places it in the signmaking engraving family.
Amana ToolSolid CarbideSingle FluteSKU 45772
Use with a compatible 1/4-inch collet in suitable signmaking and engraving equipment. Amana Tool publishes a maximum speed of 28,000 RPM and provides a separate official speed-and-feed chart for this tool family.
Main Product Description
Amana Tool 45772 is the exact Tool No. shown on its dedicated official product page. The labelled specification block confirms a 30-degree angle, 0.440-inch cutting height, 1/4-inch shank, 2-1/4-inch overall length, and 0.010-inch tip width.
Amana Tool identifies this solid-carbide engraving geometry for extra-fine carving and lettering details in wood, plastic, aluminum, and solid-surface materials. The narrow verified tip width supports fine detail within the 30-degree profile.
The exact page publishes a maximum speed of 28,000 RPM and provides a Vectric-compatible tool file, SKU-specific DXF and PDF resources, and an official 30-, 45-, and 60-degree engraving speed chart. That chart identifies 45772 within the solid-carbide single-flute family.
Technical Specifications
Solid Carbide Engraving Router Bits for Signmaking · SKU 45772
- Amana Tool
- Solid Carbide 30-Degree Engraving Router Bit
- 45772
- Solid Carbide Engraving Router Bits for Signmaking
- Solid Carbide Engraving Router Bits for Signmaking
- 30°
- 0.440 inch
- 1/4 inch
- 2-1/4 inches
- 0.010 inch
- 1 · Single Flute
- Solid Carbide
- Maximum RPM: 28,000 · Primary Use: Extra-Fine Carving and Lettering Details · Workpiece Materials: Wood · Plastic · Aluminum · Solid Surface · Digital Tool Support: Vectric Tool File · DXF · PDF
- Use with a compatible 1/4-inch collet in suitable signmaking and engraving equipment. Amana Tool publishes a maximum speed of 28,000 RPM and provides a separate official speed-and-feed chart for this tool family.
Best Fit Applications
Extra-Fine Carving Details
Fine Lettering
Wood Signmaking
Plastic Engraving
Aluminum & Solid-Surface Engraving
Product Highlights
Solid-Carbide Single Flute
The official engraving chart places 45772 in the solid-carbide single-flute family for 30-degree engraving applications.
Official Digital Tool Resources
The product page provides a Vectric-compatible tool file, SKU-specific DXF and PDF resources, and an engraving speed chart.
Compatibility & Installation Notes
Confirm exact Tool No. 45772, a compatible 1/4-inch collet, adequate tool clearance, secure workholding, and material suitability. Do not exceed the manufacturer-published maximum of 28,000 RPM. Use the official Amana Tool resources corresponding to this SKU and follow the router, CNC, and machine-manufacturer safety documentation.
Extra-Fine Engraving Detail in a Verified 30-Degree Profile
Amana Tool 45772 combines solid-carbide single-flute construction with a 30-degree angle, 0.010-inch tip width, 0.440-inch cutting height, 1/4-inch shank, and 2-1/4-inch overall length.
The official product record supports extra-fine carving and lettering in wood, plastic, aluminum, and solid-surface materials, subject to the published maximum speed and machine-safety requirements.