Exact RC-1104 Fit
The official RCK-136 specification identifies this cutter specifically for the Amana Tool RC-1104 V-groove tool body.
Amana Tool Solid Carbide V-Groove Insert Replacement Knife 29.8 x 12 x 1.5mm for RC-1104
CA$999.99
Out of stock
SKU
RCK-136
Product Type
Solid Carbide V-Groove Replacement Cutter
Family / Category
General-Purpose V-Groove,Miter Fold &Signmaking Insert CNC Replacement Cutters
Dimensions
29.8 × 12 × 1.5mm
Compatible Tool No.
RC-1104
Cutting Material
Solid carbide
Service Method
Replace worn insert cutter
Applications
Miter folds,signmaking,and lettering
Material Groups
Composites,foam,laminate,melamine,MDF/HDF,sign board,solid surface,veneered plywood,and wood
Solid Carbide
V-Groove Replacement Cutter
Replacement Cutter
Amana Tool RCK-136 is a 29.8 × 12 × 1.5mm solid-carbide replacement cutter for the RC-1104 V-groove CNC router body. It supports miter-fold, signmaking, and lettering applications across the manufacturer-listed panel, composite, and wood materials.
29.8 mmLength
12 mmWidth
1.5 mmThickness
RC-1104Compatible Tool No.
Replacement Cutter
A solid-carbide service component for the Amana Tool RC-1104 insert V-groove CNC router body. Its exact dimensions and Tool No. identify the correct general-purpose replacement cutter for this system.
Amana ToolSolid CarbideV-Groove SystemSKU RCK-136
Officially specified for Amana Tool RC-1104. The insert-tooling design allows a worn cutter to be replaced without replacing the complete router body.
Main Product Description
Amana Tool RCK-136 is the exact solid-carbide V-groove replacement cutter measuring 29.8 × 12 × 1.5mm. The dedicated manufacturer page specifies it for Tool No. RC-1104.
This cutter is part of Amana Tool's general-purpose V-groove, miter-fold, signmaking, and lettering insert tooling family. When the cutting edge becomes worn, the insert is replaced while the compatible router body remains in service.
Manufacturer-listed material groups include composites, composite decking, foam, laminate, melamine, MDF/HDF, sign board, solid surface, veneered plywood, wood, Xanita® Board, and 20 lb high-density urethane. Selected metals and carbon fibre are listed for engraving only.
Technical Specifications
V-Groove Replacement Cutter · RCK-136
- Amana Tool
- Solid Carbide V-Groove Replacement Cutter
- RCK-136
- General-Purpose V-Groove Insert Tooling
- Solid Carbide General-Purpose V-Groove, Miter Fold & Signmaking Insert CNC Replacement Cutters
- Solid Carbide
- 29.8 × 12 × 1.5mm
- Miter folds, signmaking & lettering
- Replace worn insert cutter
- 29.8 mm
- 12 mm
- 1.5 mm
- Miter Folds · Signmaking & Lettering · MDF / HDF & Sign Board
- Officially specified for Amana Tool RC-1104. The insert-tooling design allows a worn cutter to be replaced without replacing the complete router body.
Best Fit Applications
Miter Folds
Signmaking & Lettering
MDF / HDF & Sign Board
Laminate, Melamine & Composites
Wood & Veneered Plywood
Product Highlights
Replaceable Solid Carbide
Replace the worn cutting component while retaining the compatible CNC router body, rather than replacing the complete brazed tool.
Profile-Preserving Service
Amana Tool states that these cutters can be resharpened multiple times without changing the original profile.
Compatibility & Installation Notes
Use RCK-136 only with Amana Tool RC-1104. Before operating the insert tool, confirm the set screw is tightened firmly. When replacing a worn cutter, clean the tool and remove dust from the seating area before installation. Use suitable CNC hold-downs to reduce the possibility of workpiece movement.
Verified Solid-Carbide Replacement Fit for RC-1104
RCK-136 provides the exact 29.8 × 12 × 1.5mm replacement format specified for the Amana Tool RC-1104 V-groove CNC router body.
Its solid-carbide construction supports the manufacturer's listed miter-fold, signmaking, lettering, panel, composite, and wood applications.