Verified 90-Degree Folding Geometry
Exact SKU RC-45716 pairs a 90-degree included angle with a 0.090-inch flat tip and 43/64-inch cutting diameter.
Amana Tool Solid Carbide Insert V-Groove 90 Deg. Folding for Aluminum Composite Material (ACM) Pa
CA$999.99
Out of stock
SKU
RC-45716
Product Type
Insert Carbide Double-Edge Folding V-Groove CNC Router Bit
Family / Category
Insert Carbide V-Groove,Miter Fold &Signmaking CNC Router Bits
Angle / Flat Tip
90° angle · 0.090-inch flat tip
Diameter
43/64 inch
Cutting Height
19/64 inch
Shank / Overall
1/4-inch shank · 2-9/32-inch overall length
Geometry / Speed
2 flutes · Maximum 35,000 RPM
Cutting Material
Replaceable solid-carbide insert
Applications
Flat-bottom folding grooves in ACM,ACP,and compatible composite sandwich panels
Insert Carbide 90° V-Groove
Double-Edge Folding for Composite Panels
Insert V-Groove
Amana Tool RC-45716 is the exact double-edge folding V-groove CNC router bit with a 90-degree included angle, 0.090-inch flat tip width, 43/64-inch diameter, 19/64-inch cutting height, 1/4-inch shank, two flutes, and a manufacturer-published maximum speed of 35,000 RPM.
90°Angle (a°)
0.090 inFlat Tip Width (D1)
43/64 inDiameter (D)
35,000Maximum RPM
Insert V-Groove
A two-flute insert-carbide CNC router bit for forming flat-bottom V-grooves in aluminum and other composite sandwich panels. The exact official Tool No. is RC-45716.
Amana ToolInsert Carbide1/4-Inch ShankSKU RC-45716
Amana Tool specifies this bit for CNC routing and scoring of compatible composite panels. Confirm a compatible 1/4-inch collet and observe the official maximum speed of 35,000 RPM together with machine, insert, guarding, and workholding requirements.
Main Product Description
Amana Tool RC-45716 is the exact SKU shown on its dedicated official product page. The specification block confirms a 90-degree angle, 45-degree a1 angle, 43/64-inch diameter, 0.090-inch D1 flat tip, 19/64-inch cutting height, 27/64-inch B1 dimension, 1/4-inch shank, 2-9/32-inch overall length, two flutes, and a 35,000 maximum RPM.
The insert-carbide geometry is designed to shape aluminum composite sandwich materials with flat-bottom V-grooves. The official application list covers ACM and ACP panels, aluminum and other metal-faced composite panels, PE and fire-resistant cores, plastics, phenolics, and wood.
The official replacement-parts table identifies solid-carbide insert RCK-456, Torx screw 67312, and Torx key 5005. These codes are service references rather than separate products included with this SKU.
Technical Specifications
Insert Carbide V-Groove CNC Router Bit · SKU RC-45716
- Amana Tool
- Insert Carbide V-Groove
- RC-45716
- Composite Panel CNC Router Bits
- Insert Carbide V-Groove, Miter Fold & Signmaking CNC Router Bits
- 90°
- 45°
- 43/64 inch
- 0.090 inch
- 19/64 inch
- 27/64 inch
- 1/4 inch
- Overall Length (L): 2-9/32 inches · Maximum RPM: 35,000 · Flutes: 2 · Active Cutting Material: Solid Carbide Insert · Replacement Insert: RCK-456 · 4 Cutting Edges · Replacement Torx Screw: 67312 · Torx Key: 5005 · Machine: CNC Router
- Amana Tool specifies this bit for CNC routing and scoring of compatible composite panels. Confirm a compatible 1/4-inch collet and observe the official maximum speed of 35,000 RPM together with machine, insert, guarding, and workholding requirements.
Best Fit Applications
Aluminum Composite Panels
ACP Cladding & Facade Panels
Composite Signage & Displays
PE & Fire-Resistant Core Panels
Flat-Bottom Folding Grooves
Product Highlights
Replaceable Solid-Carbide Insert
The insert-carbide system uses verified replacement insert RCK-456 with four cutting edges for serviceable edge renewal.
Compact Two-Flute CNC Format
A 19/64-inch cutting height, 1/4-inch shank, two flutes, and 2-9/32-inch overall length define this exact variant.
Compatibility & Installation Notes
Confirm exact SKU RC-45716, a compatible 1/4-inch collet, cutter clearance, secure workholding, guarding, and properly seated service components. Do not exceed the official maximum speed of 35,000 RPM. RCK-456, 67312, and 5005 are service-part references, not additional products included with this SKU. Follow Amana Tool and machine-manufacturer safety documentation.
Flat-Bottom Folding Grooves for Composite Panel Fabrication
Amana Tool RC-45716 combines a 90-degree angle, 0.090-inch flat tip, 43/64-inch diameter, 19/64-inch cutting height, 1/4-inch shank, two flutes, and a 2-9/32-inch overall length.
Its replaceable solid-carbide insert system is designed for cutting and scoring compatible aluminum and other composite sandwich panels, subject to the official 35,000 maximum RPM and machine requirements.