Verified 130-Degree Profile
Exact Tool No. RC-1107 combines a 130-degree V angle, 65-degree a1 angle, 2-1/8-inch diameter, and 1/2-inch cutting height.
Amana Tool Insert Carbide 130° V-Groove CNC Router Bit, 2-1/8" Diameter x 1/2" Cutting Height x 1/2" Shank
CA$999.99
Out of stock
SKU
RC-1107
Product Type
Insert Carbide 130° V-Groove CNC Router Bit
Family / Category
Insert Carbide V-Groove,Miter Fold &Signmaking CNC Router Bits
Angle / Profile
130° V-groove angle · 65° a1 angle
Diameter / Cut
2-1/8-inch diameter · 1/2-inch cutting height
Shank / Overall
1/2-inch shank · 3-inch overall length
Geometry
1 cutting edge · 2 flutes · 2 replaceable inserts
Insert System
Solid carbide · RCK-137 general purpose · RCK-354 MDF optional
Speed
18,000 RPM published speed chart · 22,000 RPM maximum
Applications
Miter folds,signmaking,lettering,wood panels,plastics,composites and engraving
Insert Carbide 130°
V-Groove CNC Router Bit
130° V-Groove Bit
Amana Tool RC-1107 is the exact 130-degree insert-carbide V-groove CNC router bit with a 2-1/8-inch diameter, 1/2-inch cutting height, 1/2-inch shank, 3-inch overall length, two flutes, two replaceable carbide inserts, and a manufacturer-published maximum speed of 22,000 RPM.
130°V-Groove Angle (a°)
2-1/8 inDiameter (D)
1/2 inCutting Height (B)
22,000Maximum RPM
130° V-Groove Bit
A professional CNC insert-carbide router bit for miter folds, signmaking, lettering, and compatible engraving work. The exact official Tool No. is RC-1107.
Amana ToolInsert Carbide1/2-Inch ShankSKU RC-1107
Intended for compatible CNC routing equipment with a 1/2-inch collet, secure workholding, and operation within the published 22,000 RPM limit. The current Amana Tool speed chart lists 18,000 RPM for RC-1107.
Main Product Description
Amana Tool RC-1107 is the exact Tool No. shown on its dedicated official product page. The labelled specification block confirms a 130-degree V-groove angle, 65-degree a1 angle, 2-1/8-inch diameter, 1/2-inch cutting height, 1-5/32-inch B1 dimension, 1/2-inch shank, 3-inch overall length, and 2-inch L1 dimension.
The insert-carbide design is built for CNC miter-fold work, signmaking, and lettering. Amana Tool also lists acrylic and plastic, composites, composite decking, epoxy, foam, HDPE, laminate, melamine, MDF/HDF, PVC, sign board, solid surface, veneered plywood, wood, Xanita® Board, and high-density urethane among the compatible materials.
Following the current component-compatibility records, this page uses RCK-137 general-purpose solid-carbide inserts, optional RCK-354 MDF inserts, Torx screw 67115, and Torx key 5005. The product page publishes a maximum speed of 22,000 RPM, while the current V-groove speed chart lists 18,000 RPM.
Technical Specifications
Insert Carbide V-Groove, Miter Fold & Signmaking CNC Router Bits · SKU RC-1107
- Amana Tool
- Insert Carbide 130° V-Groove CNC Router Bit
- RC-1107
- CNC V-Groove & Signmaking Tooling
- Insert Carbide V-Groove, Miter Fold & Signmaking CNC Router Bits
- 130°
- 65°
- 2-1/8 inches
- 1/2 inch
- 1-5/32 inches
- 1
- 1/2 inch
- Overall Length (L): 3 inches · L1: 2 inches · Maximum RPM: 22,000 · Published Speed Chart RPM: 18,000 · Flutes: 2 · Number of Inserts: 2 · Active Cutting Material: Solid Carbide Inserts · General-Purpose Inserts: RCK-137 · 29.8 × 12 × 1.5mm · 2 Required · Optional MDF Inserts: RCK-354 · 29.8 × 12 × 1.5mm · 2 Required · Torx Screw: 67115 · 4 Required · Torx Key: 5005 · T-15
- Intended for compatible CNC routing equipment with a 1/2-inch collet, secure workholding, and operation within the published 22,000 RPM limit. The current Amana Tool speed chart lists 18,000 RPM for RC-1107.
Best Fit Applications
Miter-Fold Joinery
Signmaking & Lettering
MDF/HDF & Veneered Plywood
Plastics, Composites & Solid Surface
Non-Ferrous Metal Engraving
Product Highlights
Current Insert Compatibility
Current component records identify RCK-137 general-purpose inserts and optional RCK-354 MDF inserts as compatible with RC-1107.
Broad CNC Material Coverage
Verified applications include miter folds, signmaking, lettering, wood-based panels, plastics, composites, solid surface, and engraving work.
Compatibility & Installation Notes
Confirm exact Tool No. RC-1107, a compatible 1/2-inch CNC collet, adequate cutter clearance, secure workholding, and operation within the manufacturer’s published limits. The product page lists a 22,000 RPM maximum, and the current speed chart lists 18,000 RPM for RC-1107. Amana Tool limits the listed aluminum, brass, bronze, copper, gold, silver, and carbon-fiber applications to engraving. For Xanita LightBoard panels, the manufacturer recommends the optional MDF inserts. Follow all Amana Tool and CNC machine safety documentation.
Replaceable-Carbide Accuracy for 130-Degree CNC V-Grooving
Amana Tool RC-1107 combines a 130-degree V angle, 2-1/8-inch diameter, 1/2-inch cutting height, 1/2-inch shank, 3-inch overall length, two flutes, and two replaceable solid-carbide inserts.
The exact official page supports miter folds, signmaking, lettering, and a broad range of wood, panel, plastic, composite, foam, and solid-surface materials, with non-ferrous metals and carbon fiber limited to engraving work.