In-Groove™ Interchangeability
Exchange the knife variant instantly while your primary tool holder stays chucked inside the spindle, keeping setup tolerances flawless.
Amana Tool In-Groove Solid Carbide Core Box 3/32" Radius Insert Engraving Knife
CA$999.99
Out of stock
SKU
RCK-422
Product Type
Core Box Engraving Insert Knife
Family / Category
In-Groove™ CNC Insert Engraving System
Profile Radius
3/32 inch · R2.4mm
Cutting Height
6mm · 15/64 inch
Feed Recommendation
80 Inches/Min Plunge Feed
Cutting Material
Solid Carbide
Applications
Precision engraving,signmaking,panel etching,and detail relief work
Solid Carbide Core Box
Insert Engraving Knife
Insert Knife
Amana Tool RCK-422 is a premium solid carbide core box insert engraving knife engineered specifically for the industrial In-Groove™ CNC Insert Engraving System, featuring a 3/32-inch radius (R2.4mm) and a 6mm cutting height.
3/32 inRadius (R)
6 mmCutting Height (B)
CarbideMaterial
80 IPMPlunge Feed
Insert Knife
Industrial-quality solid carbide replacement engraving insert knife. Exact official Tool No. RCK-422, built exclusively for high-precision detailing in the Amana In-Groove™ system.
Amana ToolSolid CarbideIn-Groove™ FitSKU RCK-422
Engineered for rapid interchangeability inside In-Groove™ CNC tool bodies (RC-1075, RC-1076, RC-1077, RC-1078) while mounted to maintain exact alignment and eliminate processing downtime.
Main Product Description
The Amana Tool RCK-422 is a solid carbide core box replacement insert knife engineered for the innovative In-Groove™ Insert Engraving System. It delivers industrial cutting geometry featuring an exact 3/32-inch radius (R2.4mm) and a 6mm (15/64") cutting height (B) to execute crisp, vibration-free engraving profiles across a wide breadth of demanding substrates.
Constructed from premium micrograin solid carbide, this industrial engraving insert outlasts conventional solid carbide bits by at least twofold. The insert configuration allows operators to quickly change out profiles while the primary tool holder remains secure inside the CNC spindle, preserving accuracy and maximizing production floor efficiency.
The official documentation specifies a recommended plunge feed rate of 80 inches per minute. This item is sold as a standalone replacement cutting component; the corresponding balanced tool bodies are available separately.
Technical Specifications
In-Groove™ System · SKU RCK-422
- Amana Tool
- Core Box Engraving Insert Knife
- RCK-422
- Signmaking & Engraving
- In-Groove™ CNC Insert Engraving Tool Body & Replacement Knives
- 3/32 inch (R2.4mm)
- 6mm (15/64")
- Solid Carbide
- 80 Inch/Min
- In-Groove™ CNC Tool Bodies Only
- RC-1075, RC-1076, RC-1077, RC-1078
- 3/32 in
- Hardwoods & Softwoods · MDF & Laminated Materials · Plastics & Acrylic Stone
- Engineered for rapid interchangeability inside In-Groove™ CNC tool bodies (RC-1075, RC-1076, RC-1077, RC-1078) while mounted to maintain exact alignment and eliminate processing downtime.
Best Fit Applications
Hardwoods & Softwoods
MDF & Laminated Materials
Plastics & Acrylic Stone
Solid Surfaces & Phenolics
Carbon Fiber & Aluminium
Product Highlights
Extended Carbide Life
Premium solid carbide edge construction delivers ultra-clean cuts and reliably lasts twice as long as traditional one-piece engraving tools.
Vibration-Free Geometry
Precision balanced when paired with official Amana holders to achieve superior clarity during demanding precision etching routines.
Compatibility & Installation Notes
Verify model RCK-422 is seated tightly within verified In-Groove™ CNC tool bodies (such as RC-1075, RC-1076, RC-1077, or RC-1078). This item consists solely of a single replacement insert knife; structural tool bodies are sold strictly separately. Do not exceed manufacturer feed rates or machine limits. Check safety guards and spindle alignment before initiating programming cycles.
Precision Industrial Detailing with the In-Groove™ System
The Amana Tool RCK-422 insert knife balances a precise 3/32" core box radius profile with a robust 6mm depth of cut. Designed specifically for professional industrial routing networks, it eliminates auxiliary workflow interruptions while providing premier longevity across signmaking, composites, and premium panel-processing operations.
The Amana Tool RCK-422 is a solid carbide core box replacement insert knife engineered for the innovative In-Groove™ Insert Engraving System. It delivers industrial cutting geometry featuring an exact 3/32-inch radius (R2.4mm) and a 6mm (15/64") cutting height (B) to execute crisp, vibration-free engraving profiles across a wide breadth of demanding substrates.