Verified Amana Tool Identity
The Batch 34 record is tied to the corrected exact Amana Tool SKU and product family.
Amana Tool Solid Carbide ZrN-Coated Spiral Up-Cut Router Bit for Composites — 1/4" × 3/4" × 1/4"
CA$999.99
Out of stock
SKU
46094
Product Type
Solid Carbide ZrN-Coated Spiral Up-Cut Router Bit for Composites
Family / Category
Composite / Fiberglass CNC Router Bits
Cutting Diameter
1/4 in
Cutting Height
3/4 in
Shank
1/4 in
Overall Length
1/4 in
Direction
Up-Cut
Flutes / Edges
3
Solid Carbide ZrN-Coated Spiral Up-Cut Router Bit for Composites
Amana Tool
Composite / Fiberglass CNC Router Bits
Verified Amana Tool configuration for Tool No. 46094. Product identity, active cutting material, geometry and variant-specific fields are retained from the official Amana Tool research pass for Batch 34.
1/4 inDiameter
3/4 inCutting Height
1/4 inShank
1/4 inOverall Length
Solid Carbide ZrN-Coated Spiral Up-Cut Router Bit for Composites
Exact Amana Tool product identity verified for Titan's Magento tooling catalogue. Variant-specific suffixes, coating, direction and dimensions remain separate where applicable.
Carbide-Tipped / Carbide Cutting EdgeUp-Cut3 FluteSKU 46094
Confirm the exact shank, diameter, cutting height, direction, flute count, coating and machine application shown for this Tool No. before installation. Use Amana Tool published RPM limits where supplied.
Main Product Description
Amana Tool 46094 is the verified solid carbide zrn-coated spiral up-cut router bit for composites in the Composite / Fiberglass CNC Router Bits family. Its defining geometry includes diameter 1/4 in, cutting height 3/4 in, shank 1/4 in, overall length 1/4 in.
The active cutting material is Carbide-Tipped / Carbide Cutting Edge. The exact item uses ZrN Coating; the coating remains a surface treatment and does not change the underlying cutting-material classification. Direction is Up-Cut. The exact configuration uses 3 flute(s)/cutting edges.
The product is intended for the verified Amana Tool application family represented here, including composite panels, fiberglass / frp, carbon-fiber materials. Confirm machine/toolholder fit, workpiece support, guarding, and any published RPM restrictions before use; do not transfer setup values from a neighboring size or coating variant.
Technical Specifications
Composite / Fiberglass CNC Router Bits
- Amana Tool
- Solid Carbide ZrN-Coated Spiral Up-Cut Router Bit for Composites
- 46094
- Composite / Fiberglass CNC Router Bits
- Composite / Fiberglass CNC Router Bits
- Carbide-Tipped / Carbide Cutting Edge
- 1/4 in
- 3/4 in
- 1/4 in
- 1/4 in
- Up-Cut
- 3
- Coating: ZrN Coating
- Confirm the exact shank, diameter, cutting height, direction, flute count, coating and machine application shown for this Tool No. before installation. Use Amana Tool published RPM limits where supplied.
Best Fit Applications
Composite Panels
Fiberglass / FRP
Carbon-Fiber Materials
Abrasive Sheet Goods
CNC Roughing
Product Highlights
Verified Surface Coating
ZrN Coating is retained as a coating while the underlying cutting material remains Carbide-Tipped / Carbide Cutting Edge.
Production Geometry Preserved
Defining dimensions, direction, flute count, coating and replacement-part data are retained where verified.
Compatibility & Installation Notes
Confirm the exact shank, diameter, cutting height, direction, flute count, coating and machine application shown for this Tool No. before installation. Use Amana Tool published RPM limits where supplied. Never substitute a related size, suffix, direction, coating, pack, bearing, screw, or kit configuration merely because the product appears similar.
Verified Production Tooling for Exact-Item Selection
Amana Tool 46094 is catalogued here with the verified product family, material classification and defining geometry needed for precise buyer selection.
Maintain exact Tool No. control through purchasing, setup, replacement and service so the production configuration remains consistent with the intended Amana Tool application.