Amana Tool 4-Piece Tru Point Roundover Insert CNC System Router Bit Set, 1/2-Inch Shank
4-Piece Tru Point
Roundover Insert CNC Set
Amana Tool AMS-216 combines one 1/2-inch-shank Tru Point CNC tool body with three industrial-quality solid-carbide roundover inserts in 1/8-inch, 3/16-inch and 1/4-inch radii. The system is designed for lettering, engraving, signmaking, fluting and decorative trimming in hardwood, softwood, MDF, plastic and plywood.
Main Product Description
Amana Tool AMS-216 is the exact four-piece Tru Point Roundover Insert CNC System set shown on its dedicated official product page. The specification block confirms a 1/2-inch shank, 2-3/4-inch tool-body overall length and the description “Tru Point Roundover Insert CNC System 4-Piece Set.”
The official set description states that AMS-216 contains one tool body and three industrial-quality solid-carbide inserts with 1/8-inch, 3/16-inch and 1/4-inch radii. The matching profiles produce a 7/8-inch cutting diameter, with cutting heights of 1/4 inch, 3/8 inch and 1/2 inch respectively.
The system is intended for lettering, engraving, signmaking, fluting and decorative trimming. Amana Tool lists hardwood, softwood, MDF, plastic and plywood as supported materials. The linked Tru Point speed-and-feed chart publishes an 18,000 RPM operating reference for this insert roundover CNC system.
Official matching insert references for the three profiles are RCK-471 for 1/8-inch radius, RCK-472 for 3/16-inch radius and RCK-473 for 1/4-inch radius. Torx screw 67110 and Torx key 5005 are the official service-hardware references. Amana Tool notes that the very fine plunge point requires careful handling and is not guaranteed against breakage.
Best Fit Applications
Product Highlights
Three Roundover Profiles
One set provides 1/8-inch, 3/16-inch and 1/4-inch radii for varied lettering, fluting and decorative trimming profiles.
Reusable Insert System
The 1/2-inch-shank tool body accepts replaceable solid-carbide profile inserts instead of requiring a separate complete tool for each included radius.
Fine Tru Point Geometry
The point-cutting roundover design is intended for detailed CNC lettering, engraving, signmaking, fluting and decorative trimming.
Compatibility & Installation Notes
Confirm exact set SKU AMS-216, a compatible 1/2-inch CNC collet, the installed radius profile, adequate clearance and guarding, secure workholding, a clean insert seat and correctly secured Torx hardware. Use the official 18,000 RPM operating reference and the Amana Tool data associated with the installed insert. The fine plunge point requires careful handling and is not guaranteed against breakage. Follow Amana Tool and CNC machine-manufacturer safety documentation.
Three Solid-Carbide Roundover Profiles on One CNC Tool Body
Amana Tool AMS-216 combines one 1/2-inch-shank, 2-3/4-inch-long Tru Point tool body with 1/8-inch, 3/16-inch and 1/4-inch solid-carbide roundover insert profiles.
Its serviceable four-piece configuration supports detailed lettering, engraving, signmaking, fluting and decorative trimming in hardwood, softwood, MDF, plastic and plywood.