Exact 19 × 6 × 6 mm Variant
Item Code 791.007.00 is the official Series 791 bearing with a 19 mm outside diameter, 6 mm bore, and 6 mm width.
CMT Orange Tools Guide Bearing 19mm OD x 6mm Bore x 6mm Wide
CA$999.99
In stock
SKU
791.007.00
Product Type
Shielded guide bearing / router-bit bearing
Family / Series
CMT Series 791 Bearings
Outside Diameter
19 mm · 3/4 inch North American listing
Bore Diameter
6 mm
Width
6 mm
Compatibility
Selected CMT bearing-guided router-bit assemblies
Verified Families
Flush-trim,pattern,roundover,mortising,V-groove,bowl-and-tray,bevel,and profile bits
Reassembly
Keep the black shield right side up
Included Component
Bearing only · related hardware varies by parent tool
Series 791
Guide Bearing
791 — Bearings
CMT 791.007.00 is the exact 19 mm outside-diameter variant in the official Series 791 bearing family. It combines a 6 mm bore and 6 mm width, with the North American table listing the outside diameter as 3/4 inch. This separately orderable non-cutting accessory is used on compatible CMT bearing-guided router-bit assemblies for flush trimming, pattern work, profiling, mortising, grooving, bowl-and-tray work, and other guided routing operations.
19 mmOutside Diameter (D)
6 mmBore Diameter (B)
6 mmBearing Width (P)
3/4 inNorth American OD
Guide Bearing
A shielded non-cutting guide bearing for compatible CMT router-bit assemblies. The exact Series 791 row identifies D = 19 mm, B = 6 mm, and P = 6 mm; the North American table publishes D as 3/4 inch.
CMT Orange ToolsNon-Cutting Accessory19 mm Outside DiameterSKU 791.007.00
Use only where the exact parent-tool row lists bearing 791.007.00. Confirm the 6 mm mounting interface, correct shield and fastening hardware, free rotation, secure seating, and black-shield orientation before operating the router or router table.
Main Product Description
CMT 791.007.00 is the exact metric bearing item in the official Series 791 Spare Parts and Accessories family. The European variation row specifies a 19 mm outside diameter, 6 mm bore, and 6 mm width. The North American row lists the same bearing as 3/4 inch outside diameter with a 6 mm bore and 6 mm width.
The bearing functions as a guide, profile-control, or flush-trim component on compatible CMT router-bit assemblies. Verified official references include selected Series 657 flush-trim and pattern bits, Series 661 roundover insert bits, 7/851B bowl-and-tray bits, 7/901B mortising bits, 7/906 flush-trim bits, 7/907 bevel-trim bits, 7/914B round-nose bits, 7/915B V-grooving bits, 7/948B plunge-ogee bits, and 7/965B classical-bead bits.
The bearing is separately orderable and does not automatically include the parent router bit, shield, screw, stop collar, spacer, key, or other assembly hardware. Related components vary by tool family and exact item row. CMT’s Series 791 safety guidance requires the black shield to remain right side up during reassembly so the shield orientation corresponds with bearing rotation.
Technical Specifications
Series 791 · SKU 791.007.00
- CMT Orange Tools
- Shielded guide bearing / router-bit bearing
- 791.007.00
- 791 — Bearings
- 19 mm · 3/4 in North American listing
- 6 mm
- 6 mm
- 19 × 6 × 6 mm
- Non-cutting accessory
- Not applicable
- Not applicable
- Black shield right side up during reassembly
- Primary Compatibility: Selected CMT bearing-guided router-bit assemblies · Verified Insert-Bit Families: 657 · 657B · 661 · Verified Industrial Families: 7/851B · 7/901B · 7/906 · 7/907 · 7/914B · 7/915B · 7/948B · 7/965B · Selected Exact Tool References: 657.192.11 · 657.692.11B · 657.994.11B · 661.050.11 · Additional Exact References: 751.002.11B · 701.190.11B · 706.190.11 · 707.210.11 · 714.190.11B · 715.190.11B · 748.190.11B · 765.301.11B · Included Components: Bearing only · Related Hardware: Varies by exact parent-tool row; not included unless explicitly stated · Dedicated Titan Image: /media/wysiwyg/titan/CMT-Bearing-791.jpg
- Use only where the exact parent-tool row lists bearing 791.007.00. Confirm the 6 mm mounting interface, correct shield and fastening hardware, free rotation, secure seating, and black-shield orientation before operating the router or router table.
Best Fit Applications
Flush-Trim & Pattern Bits
Roundover & Profile Bits
Mortising & V-Groove Bits
Bowl, Tray & Bevel-Trim Bits
Replacement & Service Use
Product Highlights
Broad Verified CMT Compatibility
Official CMT tables reference this bearing across selected insert flush-trim, pattern, roundover, bowl-and-tray, mortising, V-groove, bevel, and profile tools.
Official Reassembly Guidance
CMT specifies keeping the black shield right side up during reassembly so the shield orientation corresponds correctly with bearing rotation.
Compatibility & Installation Notes
Confirm exact Item Code 791.007.00 and dimensions 19 × 6 × 6 mm before installation. Use only on a compatible CMT assembly that explicitly lists this bearing. Inspect the bearing for roughness, play, shield damage, contamination, or binding; replace damaged components. Reassemble with the black shield right side up, use the exact shield, screw, stop collar, spacer, key, or other hardware specified by the parent-tool row, and confirm free bearing rotation before use. The router bit and related fastening hardware are not included.
Verified 19 mm Guide-Bearing Fit for Compatible CMT Tools
CMT 791.007.00 combines a 19 mm outside diameter, 6 mm bore, and 6 mm width in the official Series 791 replacement-bearing format.
Verified use across multiple CMT router-bit families and the official black-shield orientation requirement complete the service-accessory record.