Working geometry
The rounded tip follows shaped toolpaths and leaves a curved surface at the bottom of the cut.
Vortex 2210 – 2-Flute Upcut Ballnose Router Bit – 1/8 in Diameter
CA$60.45
In stock
SKU
2210
Product Type
2-Flute Upcut Ballnose Router Bit
Tool Material
Solid Carbide
Cutting Diameter
1/8 in
Cutting Length
1/2 in
Shank Diameter
1/8 in
Overall Length
1-1/2 in
Flutes
2
Cut Direction
Upcut
Rotation
Right Hand
2-Flute Upcut Ballnose Router Bit
Vortex
2210
Designed to machine curved surfaces and contours.
1/8 inCutting Diameter
1/2 inCutting Length
1/8 inShank Diameter
1-1/2 inOverall Length
2-Flute Upcut Ballnose Router Bit
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Solid CarbideUpcutRight HandSKU 2210
Choose a holder or collet for the 1/8 in shank and check the available tool clearance.
Main Product Description
This Vortex 2-flute upcut ballnose router bit is designed to machine curved surfaces and contours. It is suitable for wood and plastics.
The rounded tip follows shaped toolpaths and leaves a curved surface at the bottom of the cut. The toolpath and stepover determine the remaining scallop between passes. The upcut spiral lifts chips out of the cut. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 1/8 in cutting diameter and 1/2 in cutting length define the working section of this version. Its 1/8 in shank fits a holder or collet matched to that diameter.
Technical Specifications
2210 · 2-Flute Upcut Ballnose Router Bit
- Vortex
- 2210
- 2-Flute Upcut Ballnose Router Bit
- 2200
- Solid Carbide
- 1/8 in
- 1/2 in
- 1/8 in
- 1-1/2 in
- 2
- Upcut
- Right Hand
Tool Configuration
3D carving
fluting
rounded-bottom slots
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The 1/8 in cutting diameter and 1/2 in cutting length define the working section of this version. Its 1/8 in shank fits a holder or collet matched to that diameter.
Compatibility & Installation Notes
Confirm holder compatibility, tool projection and suitable cutting conditions for the machine and workpiece before use.
2-Flute Upcut Ballnose Router Bit
Vortex 2210 is designed to machine curved surfaces and contours. It is suitable for wood and plastics.
The rounded tip follows shaped toolpaths and leaves a curved surface at the bottom of the cut. The toolpath and stepover determine the remaining scallop between passes. The upcut spiral lifts chips out of the cut. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 1/8 in cutting diameter and 1/2 in cutting length define the working section of this version. Its 1/8 in shank fits a holder or collet matched to that diameter.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.