Working geometry
The cutting section follows the programmed path or guide to form the required shape.
Royce Ayr Solid Carbide 2-Flute Downcut Spiral Router Bit 9/32". × 1". Right-Hand
CA$54.60
In stock
SKU
R57-22217
Product Type
Solid-Carbide 2-Flute Downcut Spiral Router Bit
Series
General-Purpose Downcut Spiral / R57-220 Series
Cutting Diameter
9/32 in (7.14 mm)
Cutting Edge
1 in (25.40 mm)
Shank
5/16 in (7.94 mm)
Overall Length
2-1/2 in (63.50 mm)
Flutes
2
Cutting Geometry
Spiral
Cutting Direction
Downcut
Rotation
Right-Hand (RH)
Material
HW / Solid Carbide
Application
Fine Wood,Composite,Plastic and Laminated Routing
2-Flute Downcut Spiral
Router Bit
2-Flute Downcut Spiral Router Bit
Designed to route grooves, profiles and pockets.
D=9/32 in7.14 mm Diameter
CE=1 in6.35 mm Cutting Edge
Sh=5/16 in3.18 mm Shank
OAL=2-1/2 in50.80 mm Overall Length
2-Flute Downcut Spiral Router Bit
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Solid Carbide2 FlutesDowncut · RHSKU R57-22217
Choose a holder or collet for the 0.313 in shank and check the available tool clearance.
Main Product Description
This Royce Ayr solid carbide downcut spiral router bit is designed to route grooves, profiles and pockets. It is suitable for solid wood, wood composites, selected plastics and laminated materials.
The cutting section follows the programmed path or guide to form the required shape. Choose the entry method and depth of cut to suit the tool’s end geometry. The downcut geometry shears toward the workpiece, helping support the top edge during the pass. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 0.2813 in cutting diameter and 1 in cutting length define the working section of this version. Its 0.313 in shank fits a holder or collet matched to that diameter.
Technical Specifications
2-Flute Downcut Spiral R57-22217
- Royce Ayr
- 2-Flute General-Purpose Downcut Spiral Router Bit
- R57-22217
- General-Purpose Downcut Spiral / R57-220
- 0.28125 in / 9/32 in (7.14 mm)
- 1.000 in / 1 in (25.40 mm)
- 0.3125 in / 5/16 in (7.94 mm)
- 2.500 in / 2-1/2 in (63.50 mm)
- 2
- Spiral
- Downcut
- RH / Right Hand
- Construction: HW / Solid Carbide · Published Materials: Solid Wood, Wood Composites, Some Plastics, and Laminated Materials · Application: Fine Routing, Narrow Slots, Details, and Laminated Dado Work
- Designed for compatible equipment using an exact 5/16-inch precision collet or approved toolholder. Small-diameter tooling requires minimal projection, low runout, conservative engagement, secure workholding, and cutting parameters.
Best Fit Applications
Fine Detail Routing
Narrow Slot Cutting
Laminated Dado Work
Wood-Composite Machining
Compatible Plastic Components
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The 0.2813 in cutting diameter and 1 in cutting length define the working section of this version. Its 0.313 in shank fits a holder or collet matched to that diameter.
Compatibility & Installation Notes
Confirm toolholding for the shank size 0.313" and right-hand spindle operation. Plastic suitability is conditional; confirm the exact grade and cutting conditions. The stated laminate edge benefit is for dados; it is not a guarantee for every laminate operation.
Machine Fine Details with Controlled Downcut Action
Royce Ayr R57-22217 is designed to route grooves, profiles and pockets. It is suitable for solid wood, wood composites, selected plastics and laminated materials.
The cutting section follows the programmed path or guide to form the required shape. Choose the entry method and depth of cut to suit the tool’s end geometry. The downcut geometry shears toward the workpiece, helping support the top edge during the pass. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 0.2813 in cutting diameter and 1 in cutting length define the working section of this version. Its 0.313 in shank fits a holder or collet matched to that diameter.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.