Left-Hand Downcut Geometry
R57-32233 is the left-hand version of Royce Ayr's two-flute downcut spiral geometry and requires matching machine rotation.
Royce Ayr 2 Flute Left-Hand Downcut Spiral Router Bit – 1/2 Diameter – 1-5/8 Cut – 1/2 Shank – 3-1/2 Overall Length
CA$189.10
Out of stock
SKU
R57-32233
Product Type
2-Flute Downcut Spiral Router Bit
Series
2 Flute Downcut Spiral
Cutting Diameter
1/2 in (12.70 mm)
Cutting Edge
1-5/8 in (41.275 mm)
Shank
1/2 in (12.70 mm)
Overall Length
3-1/2 in (88.90 mm)
Flutes
2
Rotation
LH / Left Hand
Cutting Material
Solid Carbide
Geometry
Downcut Spiral
Materials
Solid Wood / Wood Composites / Some Plastics
Application
General CNC Routing / Clean Laminated Dado Edges
2-Flute Downcut
Spiral Router Bit
2 Flute Downcut Spiral
Solid-carbide left-hand two-flute downcut spiral router bit for general-purpose CNC routing in solid wood, wood composites, and some plastics. The verified R57-32233 configuration combines a 1/2-inch cutting diameter, 1-5/8-inch cutting edge, 1/2-inch shank, and 3-1/2-inch overall length. Royce Ayr specifies that the downcut design produces a clean edge when cutting a dado in laminated material.
D=1/2 in12.70 mm Diameter
CE=1-5/8 in41.275 mm Cutting Edge
SHK=1/2 in12.70 mm Shank
OAL=3-1/2 in88.90 mm Overall Length
2 Flute Downcut Spiral
Two-flute solid-carbide downcut spiral geometry with left-hand rotation. The downcut action directs cutting force toward the work surface and is specified by Royce Ayr for clean dado edges in laminated material.
Solid Carbide2 FlutesLH · DowncutSKU R57-32233
Designed for compatible CNC routers and routing systems using an exact 1/2-inch shank interface. Confirm the machine and toolholder are configured for left-hand rotation before production use.
Main Product Description
The Royce Ayr R57-32233 is a two-flute downcut spiral router bit from the company's Precision CNC Tooling range. Manufacturer catalogue data identifies this exact left-hand configuration with a 0.500-inch cutting diameter, 1.625-inch cutting edge, 0.500-inch shank, and 3.500-inch overall length.
Royce Ayr describes the 2-Flute Downcut Spiral family as a general-purpose router for solid wood, wood composites, and some plastics. Its downcut geometry is specifically intended to give a clean edge when cutting a dado in laminated material, making the family useful where the upper surface finish at the cut matters.
R57-32233 is the left-hand version of this geometry, so spindle rotation and machine setup must match the tool. Use a precision 1/2-inch collet or approved toolholder, minimize unnecessary projection, verify runout, and establish spindle speed, feed rate, pass depth, workholding, and extraction for the actual workpiece and cut strategy.
Technical Specifications
2 Flute Downcut Spiral R57-32233
- Royce Ayr
- 2-Flute Downcut Spiral Router Bit
- R57-32233
- 2 Flute Downcut Spiral
- Solid Carbide
- 0.500 in / 1/2 in (12.70 mm)
- 1.625 in / 1-5/8 in (41.275 mm)
- 0.500 in / 1/2 in (12.70 mm)
- 3.500 in / 3-1/2 in (88.90 mm)
- 2
- Downcut Spiral
- LH / Left Hand
- Material Compatibility: Solid Wood, Wood Composites and Some Plastics · Verified Cut Behavior: Clean Dado Edge in Laminated Material · Machine Type: CNC Router / Compatible Routing Equipment
- Designed for compatible CNC routers and routing systems using an exact 1/2-inch shank interface. Confirm the machine and toolholder are configured for left-hand rotation before production use.
Best Fit Applications
Solid Wood Routing
Wood Composite Routing
Selected Plastic Routing
Laminated Dado Cutting
Clean Top-Edge Routing
Product Highlights
Clean Laminated Dado Edge
Royce Ayr specifies the downcut design to provide a clean edge when cutting a dado in laminated material.
1-5/8-Inch Cutting Edge
The verified 1-5/8-inch cutting edge is paired with a 1/2-inch diameter, 1/2-inch shank, and 3-1/2-inch overall length.
Compatibility & Installation Notes
R57-32233 is a left-hand tool. Confirm that the CNC router and toolholder are configured for left-hand rotation before installation. The toolholder must accept the exact 1/2-inch (12.70 mm) shank and provide clearance for the 3-1/2-inch overall length. Inspect the collet and nut, minimize unsupported projection, verify runout, secure the workpiece, and establish spindle speed, feed rate, pass depth, and extraction for the actual material and operation.
Left-Hand Downcut Routing with a Clean Top Edge
Royce Ayr R57-32233 combines a 1/2-inch cutting diameter, 1-5/8-inch cutting edge, 1/2-inch shank, 3-1/2-inch overall length, two-flute solid-carbide construction, and left-hand downcut geometry.
Its downcut action is specified for general-purpose routing in solid wood, wood composites, and some plastics, with particular value where a clean upper edge is required when cutting dados in laminated material.