Royce Ayr 2-Flute Chipbreaker Compression Router Bit 1/2 in (12.7 mm)
2-Flute Chipbreaker Compression
Router Bit
Solid-carbide, right-hand chipbreaker compression router bit designed for CNC routing laminated or veneered wood, plywood, and wood composites where clean top and bottom edge quality is critical. Its 1/2-inch cutting diameter, 7/8-inch cutting edge, 0.200-inch upcut section, and 3-inch overall length suit compact panel-processing applications.
Main Product Description
The Royce Ayr R60-11011 is a 2-flute chipbreaker compression router bit from Royce Ayr’s solid-carbide CNC tooling range. It is designed for routing laminated or veneered wood and wood composites when clean top and bottom finish quality is critical.
The compression geometry combines upward and downward shearing action to help reduce chipping on laminate faces, while the chipbreaker design helps control furring and tearout in plywood cores. This makes the tool a practical choice for cabinet, casegoods, nested-routing, and panel-processing environments.
With a 1/2-inch (12.7 mm) cutting diameter, 7/8-inch (22.23 mm) cutting edge, 0.200-inch (5.08 mm) upcut length, 1/2-inch (12.7 mm) shank, and 3-inch (76.2 mm) overall length, R60-11011 suits compact CNC routing applications when matched to the correct collet, spindle speed, feed rate, cutting depth, and hold-down method.
Best Fit Applications
Product Highlights
Compression Edge Control
Upward and downward shearing action helps reduce chipping on the top and bottom faces of laminated, veneered, plywood, and compatible composite panels.
Chipbreaker Core Control
Chipbreaker geometry helps control furring and tearout in plywood cores while supporting cleaner chip formation during CNC panel routing.
Compact 1/2-Inch Format
The 1/2-inch diameter, 7/8-inch cutting edge, 0.200-inch upcut section, and 3-inch overall length suit compact compression-routing operations.
Compatibility & Installation Notes
Confirm that the CNC router spindle, collet, and toolholder accept an exact 1/2-inch (12.7 mm) shank. Verify right-hand rotation, tool projection, available clearance, guarding, dust extraction, part hold-down, spindle speed, feed rate, cutting depth, and pass strategy before machining. Position the 0.200-inch (5.08 mm) upcut section correctly through the workpiece so the compression transition supports the required top and bottom edge finish.
Improve Top & Bottom Panel Edge Quality
The Royce Ayr 2-Flute Chipbreaker Compression Router Bit R60-11011 provides a compact solid-carbide solution for CNC routing laminated panels, veneered panels, plywood, and wood composites where both faces require controlled edge quality.
Its compression cutting action helps reduce face chipping, while the chipbreaker geometry helps control plywood-core furring and tearout when the tool is correctly held and operated within suitable machining parameters.