Interchangeable Insert System
Insert changes can be completed while the engraving-system body remains mounted, helping reduce repeated setup time in CNC production.
Dimar Solid Carbide V-Groove Engraving Insert – V-Groove 30° – 0.24mm Diameter – 16mm Cut
CA$999.99
Out of stock
SKU
3185006
Product Type
Solid Carbide V-Groove Engraving Insert
Diameter
0.24 mm
Cutting Length
16 mm
V-Groove Angle
30°
Technology
Solid Carbide
Machine
CNC Machine
Application
Wood, veneers, laminate, composites, solid surface, and plastics
V-Groove 30°
Engraving Insert
V-Groove Insert
Dimar 3185006 is a 0.24 mm diameter solid-carbide engraving insert with 30° V-groove geometry and a 16 mm cutting length for the Dimar interchangeable CNC engraving system.
0.24 mmDiameter
16 mmCutting Length
30°V-Groove
Solid CarbideTechnology
V-Groove Insert
Industrial solid-carbide insert for the Dimar interchangeable engraving system, engineered for controlled V-groove and engraving work.
Solid Carbide30° V-GrooveIndustrialSKU 3185006
For the Dimar interchangeable engraving insert system used on CNC machines. Match the correct arbour, insert seat and retaining hardware before machining.
Main Product Description
Dimar 3185006 is an industrial solid-carbide V-groove engraving insert with a verified 0.24 mm diameter, 16 mm cutting length and 30° included geometry. Dimar identifies the exact Tool ID and SKU as 3185006.
The Dimar engraving system is designed so inserts can be changed while the tool body remains mounted in the CNC, reducing repeated setup and supporting consistent cutting accuracy. Balanced system design is intended to minimize vibration and deliver clean engraving results.
Dimar lists the system for soft wood, hard wood, veneers, laminate, composite material, solid surface and plastic. Correct insert seating, screw condition, runout, spindle parameters and workholding remain essential.
Technical Specifications
V-Groove Insert 3185006
- Dimar
- Solid Carbide V-Groove Engraving Insert
- 3185006
- Industrial Woodworking & CNC Tooling
- Industrial
- 0.24 mm
- 16 mm
- 30°
- Solid Carbide
- CNC Machine
- Soft Wood, Hard Wood, Veneers, Laminate, Composite Material, Solid Surface, Plastic
- Dimar Interchangeable Engraving Insert System
- V-Groove Engraving · Laminated Materials · Veneer & MDF
- For the Dimar interchangeable engraving insert system used on CNC machines. Match the correct arbour, insert seat and retaining hardware before machining.
Best Fit Applications
V-Groove Engraving
Laminated Materials
Veneer & MDF
Plastics & Composites
Solid-Surface Machining
Product Highlights
30° V-Groove Geometry
The official Dimar record specifies a 30-degree engraving geometry with a 16 mm cutting length.
Solid-Carbide Cutting Edge
Verified Solid Carbide technology supports clean cutting and wear resistance across the manufacturer-listed materials.
Compatibility & Installation Notes
Confirm SKU 3185006 is matched to the correct Dimar engraving-system arbour. Inspect the insert seat, retaining screw and contact surfaces, then verify tool assembly, runout, spindle speed, feed rate and workholding before machining.
Maintain Accurate CNC Engraving
Dimar 3185006 combines verified solid-carbide construction, 30° V-groove geometry and a 16 mm cutting length in an interchangeable CNC engraving insert.
Correct system matching and installation remain essential to dimensional accuracy, finish quality and tool life.