CMT ITK Plus® Diamond Fiber Cement Circular Saw Blade 10" x 5/8" Bore, 6T DP TCG
ITK Plus® Diamond
Fiber Cement Saw Blade
CMT 236.006.10 is the exact 10-inch variant in the CMT 236 ITK Plus® diamond circular-saw-blade family for ultra-hard materials. It combines a 5/8-inch bore, six DP diamond TCG teeth, a 0.087-inch kerf, 0.063-inch plate thickness, a 12° hook angle, ORANGE SHIELD® coating, and a verified 7,600 RPM maximum for compatible cutting of fiber-cement products and plasterboard.
Main Product Description
CMT 236.006.10 is the exact 10-inch item in the official Series 236 ITK Plus® diamond circular-saw-blade family. The verified product data specifies a 10-inch diameter, 5/8-inch bore, six DP diamond teeth, TCG geometry, 0.087-inch kerf, 0.063-inch plate thickness, a 12° hook angle, and a maximum permitted speed of 7,600 RPM.
The low tooth count and diamond cutting system are intended for abrasive fiber-cement boards and plasterboard rather than conventional woodworking finish cuts. CMT identifies the blade for materials including Eternit®, Swisspearl®, Fermacell®, Ivarplank®, HardiePlank®, and HardiePanel® products.
ORANGE SHIELD® non-stick coating helps the plate run cooler, limits residue buildup, and protects against corrosion. Laser-cut heat-expansion slots accommodate operating heat, while dynamic balancing, the visible tensioning ring on the 10-inch plate, and precision tooth finishing support controlled rotation and long service life in abrasive applications.
Best Fit Applications
Product Highlights
Exact 10-Inch 6T Variant
Item Code 236.006.10 combines a 10-inch diameter, 5/8-inch bore, six DP diamond teeth, 0.087-inch kerf, 0.063-inch plate, 12° hook angle, and a 7,600 RPM maximum.
DP Diamond Cutting System
The six-tooth DP TCG geometry is designed for long service life when cutting abrasive fiber-cement products and plasterboard.
Thin-Plate Stability Features
ORANGE SHIELD® coating, laser-cut heat-expansion slots, dynamic balancing, and a tensioning ring support controlled cutting and plate stability.
Compatibility & Installation Notes
Confirm exact Item Code 236.006.10, a compatible 10-inch saw-blade capacity, and a clean 5/8-inch arbor with properly matched flanges. Verify blade rotation, guarding, workpiece support, dust extraction, and controlled feed before use. Never exceed 7,600 RPM. This is a DP diamond blade for abrasive fiber-cement and plasterboard applications; do not substitute specifications from carbide-only or general-purpose Series 236 references.
Long-Life Fiber-Cement Cutting in a Verified 10-Inch Format
CMT 236.006.10 combines a 10-inch diameter, 5/8-inch bore, six DP diamond TCG teeth, 0.087-inch kerf, 0.063-inch plate, a 12° hook angle, and a 7,600 RPM maximum.
ORANGE SHIELD® coating, laser-cut heat-expansion slots, dynamic balancing, a tensioning ring, and diamond cutting edges complete the verified ITK Plus® Series 236 configuration.