Working geometry
Use the cutter for the final pass that establishes the finished edge.
Vortex 4450 – 3-Flute Low-Helix Upcut Finishing Router Bit – 1/2 in Diameter
CA$175.45
In stock
SKU
4450
Product Type
3-Flute Low-Helix Upcut Finishing Router Bit
Tool Material
Solid Carbide
Cutting Diameter
1/2 in
Cutting Length
1-1/4 in
Shank Diameter
1/2 in
Overall Length
3-1/2 in
Flutes
3
Cut Direction
Upcut
Rotation
Right Hand
3-Flute Low-Helix Upcut Finishing Router Bit
Vortex
4450
Designed to finish routed edges and contours.
1/2 inCutting Diameter
1-1/4 inCutting Length
1/2 inShank Diameter
3-1/2 inOverall Length
3-Flute Low-Helix Upcut Finishing Router Bit
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Solid CarbideUpcutRight HandSKU 4450
Choose a holder or collet for the 1/2 in shank and check the available tool clearance.
Main Product Description
This Vortex 3-flute low-helix upcut finishing router bit is designed to finish routed edges and contours. It is suitable for acrylic, phenolic, UHMW, solid surface and dense hardwood.
Use the cutter for the final pass that establishes the finished edge. A consistent allowance along the toolpath helps keep the cut even. The upcut spiral lifts chips out of the cut. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 1/2 in cutting diameter and 1-1/4 in cutting length define the working section of this version. Its 1/2 in shank fits a holder or collet matched to that diameter.
Technical Specifications
4450 · 3-Flute Low-Helix Upcut Finishing Router Bit
- Vortex
- 4450
- 3-Flute Low-Helix Upcut Finishing Router Bit
- 4400
- Solid Carbide
- 1/2 in
- 1-1/4 in
- 1/2 in
- 3-1/2 in
- 3
- Upcut
- Right Hand
Tool Configuration
edge finishing
profile routing
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The 1/2 in cutting diameter and 1-1/4 in cutting length define the working section of this version. Its 1/2 in shank fits a holder or collet matched to that diameter.
Compatibility & Installation Notes
Confirm holder compatibility, tool projection and suitable cutting conditions for the machine and workpiece before use.
3-Flute Low-Helix Upcut Finishing Router Bit
Vortex 4450 is designed to finish routed edges and contours. It is suitable for acrylic, phenolic, UHMW, solid surface and dense hardwood.
Use the cutter for the final pass that establishes the finished edge. A consistent allowance along the toolpath helps keep the cut even. The upcut spiral lifts chips out of the cut. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 1/2 in cutting diameter and 1-1/4 in cutting length define the working section of this version. Its 1/2 in shank fits a holder or collet matched to that diameter.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.