90-Degree V-Point Geometry
The verified included angle is 90 degrees for V-grooving and beveling operations.
Vortex Tool 3/8" × 5/8" Solid Carbide 90° V-Point Bit, 3/8" Diameter × 5/8" Cutting Length
CA$114.15
In stock
SKU
3845
Product Type
Solid-carbide V-point profile bit
Series
Vortex Tool Series 3800
Profile Geometry
90° V-point · Slight shear angle
Cutting Diameter
3/8 in
Cutting Edge Length
5/8 in
Shank / Overall Length
3/8 in shank · 3 in overall length
Catalog X Dimension
0.188 in
Cutting Material
Solid carbide
Application
V-grooving and beveling compatible wood,composites,laminates,plastics,and solid-surface materials
Solid-Carbide 90° V-Point
Profile Bit
Series 3800
A Vortex Tool Series 3800 solid-carbide V-point bit for V-grooving and beveling natural wood, wood composites, laminated and veneered materials, plastics, and solid-surface materials. The verified 3845 configuration combines a 3/8-inch cutting diameter, 5/8-inch cutting-edge length, 3/8-inch shank, 3-inch overall length, and 90-degree included angle.
3/8 inCutting Diameter
5/8 inCutting Edge Length
90°Included Angle
3 inOverall Length
90° V-Point Bit
This Series 3800 solid-carbide profile tool uses a 90-degree V-point geometry and a slight shear angle to support chip removal during V-grooving and beveling operations.
Solid Carbide90° V-PointSlight Shear AngleSKU 3845
Designed for compatible CNC routers and routing systems using a precision 3/8-inch collet or holder. Confirm machine clearance for the 3-inch overall length and verify the programmed angle, cutting depth, toolpath direction, workholding, and material suitability before production.
Main Product Description
The Vortex Tool 3845 is a Series 3800 solid-carbide V-point bit with a 90-degree included angle. Vortex designs this family for V-grooving or beveling natural wood, wood composites, laminated and veneered materials, plastics, and solid-surface materials.
The Series 3800 geometry incorporates a slight shear angle to support chip removal. For the exact 3845 configuration, the cutting diameter is 3/8 inch and the cutting-edge length is 5/8 inch.
The tool uses a 3/8-inch shank, has a 3-inch overall length, and carries a catalog X dimension of 0.188 inch. Proper collet condition, shank engagement, spindle runout, tool projection, cutting depth, feed rate, spindle speed, workholding, and chip evacuation remain essential to groove and bevel quality.
Technical Specifications
Series 3800 · SKU 3845
- Vortex Tool
- Solid-Carbide V-Point Bit
- 3845
- 3800
- 3/8 in
- 5/8 in
- 3/8 in
- 3 in
- 90° V-Point with Slight Shear Angle
- 90°
- Solid Carbide
- Catalog X Dimension: 0.188 in
- Recommended Materials: Natural Wood, Wood Composites, Laminates, Veneers, Plastics, and Solid Surface · Primary Operations: V-Grooving and Beveling
- Designed for compatible CNC routers and routing systems using a precision 3/8-inch collet or holder. Confirm machine clearance for the 3-inch overall length and verify the programmed angle, cutting depth, toolpath direction, workholding, and material suitability before production.
Best Fit Applications
90° V-Grooving
Decorative Beveling
Wood and Composite Routing
Laminate and Veneer Profiling
Plastic and Solid-Surface Routing
Product Highlights
Slight Shear Angle
Vortex manufactures the Series 3800 geometry with a slight shear angle to support chip removal.
Verified 3/8-Inch Format
A 3/8-inch diameter, 5/8-inch cutting length, 3/8-inch shank, 3-inch overall length, and 0.188-inch X dimension define SKU 3845.
Compatibility & Installation Notes
Install the 3/8-inch shank in a clean, undamaged precision collet or compatible holder with adequate engagement and safe tool projection. Verify spindle runout, machine clearance for the 3-inch overall length, the programmed 90-degree profile, cutting depth, toolpath direction, feed rate, spindle speed, workholding, chip evacuation, and workpiece compatibility before production. Vortex does not publish a flute count or rotation designation for SKU 3845; do not assume either field from another Series 3800 tool.
Controlled 90° V-Grooving and Beveling
Vortex Tool 3845 combines solid-carbide construction with a 90-degree V-point, 3/8-inch cutting diameter, 5/8-inch cutting length, 3/8-inch shank, and 3-inch overall length.
Accurate toolpath geometry, correct cutting depth, low runout, secure workholding, suitable cutting parameters, and effective chip evacuation are essential to achieving clean, repeatable V-grooves and bevels.