0.187-Inch Bead Radius
The verified profile uses a 0.187-inch radius to create a defined decorative bead form.
Vortex Tool Solid Carbide Beading Bit, 0.187" Radius, 1/2" Shank – 1/2" Shank
CA$242.85
In stock
SKU
3760
Product Type
Solid-carbide beading profile bit
Series
Vortex Tool Series 3700
Profile Geometry
Decorative bead profile
Profile Radius
0.187 in
Small Diameter
0.110 in
Shank / Overall Length
1/2 in shank · 3 in overall length
Cutting Material
Solid carbide
Application
Decorative bead routing in a wide variety of compatible materials
Solid-Carbide Beading
Profile Bit
Series 3700
A Vortex Tool Series 3700 solid-carbide beading bit designed to cut decorative bead profiles in a wide variety of materials. The verified 3760 configuration combines a 0.187-inch radius, 0.110-inch small diameter, 1/2-inch shank, and 3-inch overall length.
0.187 inProfile Radius
0.110 inSmall Diameter
1/2 inShank Diameter
3 inOverall Length
Beading Profile Bit
This Series 3700 solid-carbide profile tool is designed to form a decorative bead using a verified 0.187-inch radius and 0.110-inch small diameter. Vortex lists the beading-bit family for decorative profiling across a wide variety of materials.
Solid CarbideBeading Profile0.187 in RadiusSKU 3760
Designed for compatible CNC routers and routing systems using a precision 1/2-inch collet or holder. Confirm machine clearance for the 3-inch overall length and verify the programmed toolpath, profile orientation, cutting direction, workholding, and material suitability before production.
Main Product Description
The Vortex Tool 3760 is a Series 3700 solid-carbide beading bit for producing decorative bead profiles. Its profile is defined by a 0.187-inch radius and a 0.110-inch small diameter.
Vortex describes its solid-carbide beading bits as tools for cutting decorative beads in a wide variety of materials. The profile geometry supports repeatable decorative routing when the toolpath, depth, orientation, and workpiece support are correctly established.
The exact 3760 configuration uses a 1/2-inch shank and has a 3-inch overall length. Proper collet condition, shank engagement, spindle runout, tool projection, feed rate, spindle speed, workholding, and chip evacuation remain essential to profile quality and tool service life.
Technical Specifications
Series 3700 · SKU 3760
- Vortex Tool
- Solid-Carbide Beading Bit
- 3760
- 3700
- 0.187 in
- Decorative Bead
- 1/2 in
- 3 in
- 0.110 in
- Beading Profile Bit
- Solid Carbide
- Product Highlight: 0.187-Inch Bead Radius — The verified profile uses a 0.187-inch radius to create a defined decorative bead form.
- Material Scope: Wide Variety of Compatible Materials · Primary Application: Decorative Bead Profile Routing
- Designed for compatible CNC routers and routing systems using a precision 1/2-inch collet or holder. Confirm machine clearance for the 3-inch overall length and verify the programmed toolpath, profile orientation, cutting direction, workholding, and material suitability before production.
Best Fit Applications
Decorative Bead Profiles
CNC Profile Routing
Radius Profile Detailing
Repeatable Decorative Cuts
Compatible Multi-Material Routing
Product Highlights
Solid-Carbide Construction
The active cutting tool is solid carbide and routes to Titan’s solid-carbide material image and tooling classification.
Verified Profile Dimensions
A 0.110-inch small diameter, 1/2-inch shank, and 3-inch overall length define the exact 3760 configuration.
Compatibility & Installation Notes
Install the 1/2-inch shank in a clean, undamaged precision collet or compatible holder with adequate engagement and safe tool projection. Verify spindle runout, machine clearance for the 3-inch overall length, profile orientation, programmed cutting direction, toolpath depth, feed rate, spindle speed, workholding, chip evacuation, and workpiece compatibility before production. The manufacturer does not publish a flute count or bearing specification for SKU 3760; do not assume either from another Series 3700 variant.
Decorative Bead Profile Control
Vortex Tool 3760 combines solid-carbide construction with a 0.187-inch bead radius, 0.110-inch small diameter, 1/2-inch shank, and 3-inch overall length for decorative profile routing.
Accurate toolpath geometry, correct cutting depth, low runout, secure workholding, suitable cutting parameters, and effective chip evacuation are essential to achieving a clean, repeatable bead profile.