Vortex Tool Series 3200C Viper Plus Three-Flute Chipbreaker Compression Spiral Router Bit – 3/8 in Diameter x 1-1/8 in Cutting Length
Three-Flute
Chipbreaker Compression
A Vortex Tool Series 3200C “Viper Plus” three-flute solid-carbide compression spiral with chipbreakers, a 3/8-inch cutting diameter, 1-1/8-inch cutting-edge length, 0.500-inch upcut length, 3/8-inch shank, and 3-inch overall length. The chipbreaker geometry is designed to reduce fuzzing and scaling in plywoods and hardwoods while supporting higher feed capability.
Main Product Description
The Vortex Tool 3230C is part of the Series 3200C three-flute compression-spiral family with chipbreakers. Its upcut and downcut flute sections compress the material toward the centre of the cut, helping protect both workpiece faces while the chipbreaker edges interrupt chip formation.
Vortex specifies the Series 3200C design for plywoods and hardwoods where fuzzing or scaling is a problem. The three-flute configuration provides additional cutting-edge engagement for higher feed capability, while the chipbreaker geometry helps improve edge condition in demanding wood and laminated-panel routing.
The verified 3230C configuration uses a 3/8-inch cutting-edge diameter, 1-1/8-inch cutting-edge length, 3/8-inch shank, 3-inch overall length, 0.500-inch upcut section, three flutes, chipbreaker compression geometry, and right-hand rotation. Correct collet condition, spindle runout, projection, feed, RPM, workholding, and chip evacuation are essential to finish quality and tool life.
Best Fit Applications
Product Highlights
Chipbreaker Edge Control
Chipbreaker cutting edges are designed to reduce fuzzing and scaling in plywoods and hardwoods where clean edge quality is difficult to maintain.
Three-Flute Feed Capability
The three-flute configuration provides additional cutting-edge engagement to support higher feed capability in compatible production routing.
Compression Cut Direction
Combined upcut and downcut flute sections compress the cut toward the workpiece centre to support clean top and bottom edges.
Compatibility & Installation Notes
Confirm a clean, undamaged 3/8-inch collet or compatible holder, correct right-hand spindle rotation, adequate shank engagement, safe tool projection, machine RPM limits, feed rate, workpiece support, workholding, and chip evacuation before use. Program the cut so the 0.500-inch upcut section and compression transition are positioned correctly within the workpiece. Final feed and speed values must be established for the machine, material, cut depth, and required finish.
Viper Plus Edge Control
Vortex Tool 3230C combines Series 3200C three-flute chipbreaker compression geometry with a verified 3/8-inch cutting diameter, 1-1/8-inch cutting length, 0.500-inch upcut, 3/8-inch shank, and 3-inch overall length.
The solid-carbide Viper Plus design is intended for plywood, hardwood, laminated-panel, and high-production routing applications where reduced fuzzing, reduced scaling, clean two-sided edges, and higher feed capability are important production goals.