Vortex Tool Series 2200 Two-Flute Upcut Ballnose Spiral Router Bit – 8mm Diameter x 25mm Cutting Length
Two-Flute Upcut
Ballnose Spiral
A Vortex Tool Series 2200 solid-carbide upcut ballnose spiral router bit with an 8mm cutting diameter, 25mm cutting-edge length, 8mm shank, and 64mm overall length. Its ballnose point geometry is designed for clean profile cutting in compatible wood and plastic applications.
Main Product Description
The Vortex Tool 2222 is the metric 8mm configuration in the Series 2200 two-flute upcut ballnose spiral range. Vortex developed this geometry to produce cleaner profile cuts than conventional ballnose end mills, with point geometry specifically intended for compatible wood and plastic routing.
The rounded ballnose end supports 3D modeling, detailed carving, fluting, rounded-bottom slots, and rounded inside-corner work. Its upcut spiral directs chips upward during cutting, which can improve chip removal in slots and recessed toolpaths.
The verified 2222 configuration uses an 8mm cutting-edge diameter, 25mm cutting-edge length, 8mm shank, and 64mm overall length. Correct collet condition, minimal spindle runout, conservative tool projection, secure workholding, and suitable cutting parameters are especially important for this metric precision tool.
Best Fit Applications
Product Highlights
Fine Ballnose Geometry
The 8mm ballnose profile supports detailed carving, 3D modeling, radiused slots, fluting, and rounded inside-corner toolpaths.
Two-Flute Upcut Design
Two cutting flutes combine with upward chip flow to support chip evacuation during compatible profile, slot, and recessed routing operations.
Compact Precision Format
The 8mm cutting diameter and 25mm cutting length are paired with a matching 8mm shank and 64mm overall length.
Compatibility & Installation Notes
Confirm a clean, undamaged 8mm collet or compatible toolholder, correct right-hand spindle rotation, adequate shank engagement, minimum practical tool projection, machine RPM limits, feed rate, cut depth, chip evacuation, workholding, and workpiece suitability before use. Upcut geometry can create lifting force, and the small cutting diameter requires careful runout control and conservative setup.
Detailed Ballnose Routing
Vortex Tool 2222 combines two-flute upcut geometry with an 8mm ballnose profile for compatible 3D carving, fluting, rounded-slot, and detailed profile-routing operations in wood and plastics.
Correct 8mm collet fit, low spindle runout, minimal tool projection, secure workholding, appropriate feed and RPM, and effective chip evacuation are essential to stable cutting performance.