Working geometry
This component renews the working edge of a compatible cutter.
Tigra 100791 – Radius-Edge Square Knife – 15 × 15 × 2.5 mm – R150
CA$15.00
In stock
SKU
100791
Tigra 100791 – Radius-Edge Square Knife – 15 × 15 × 2.5 mm – R150 is available to buy in increments of 10
Product Class
Knife
Product Type
Radius-Edge Square Knife
Manufacturer Part Number
100791
Knife Length (L)
15 mm
Knife Width (W)
15 mm
Knife Thickness (T)
2.5 mm
Profile Radius (R)
150 mm
Tool Material
carbide
Cutting Edge Angle (degrees)
30
Cutting Edges
4
Edge / Groove Geometry
radius cutting edges, pointed corners
Radius-Edge Square Knife
Tigra
100791
Designed to replace a worn cutting edge.
15 mmKnife Length (L)
15 mmKnife Width (W)
2.5 mmKnife Thickness (T)
150 mmProfile Radius (R)
Radius-Edge Square Knife
Carbide cutting edges provide a hard, wear-resistant working surface.
KnifeSKU 100791
Match the knife profile, seat and fastening arrangement to the cutterhead.
Main Product Description
This Tigra radius-edge square knife is designed to replace a worn cutting edge.
This component renews the working edge of a compatible cutter. The knife profile, seat and fastening arrangement must all match the tool body. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 15 mm long, 15 mm wide and 2.5 mm thick. The profile radius is 150 mm.
Technical Specifications
100791 · Radius-Edge Square Knife
- Tigra
- 100791
- Knife
- Radius-Edge Square Knife
- Tigra knife and insert components
- 100791
- 15 mm
- 15 mm
- 2.5 mm
- 150 mm
- carbide
- 30
- 4
- radius cutting edges, pointed corners
Component Configuration
woodworking with a matching knife carrier
Product Highlights
Cutting material
Carbide cutting edges provide a hard, wear-resistant working surface.
This version
The knife is 15 mm long, 15 mm wide and 2.5 mm thick. The profile radius is 150 mm.
Compatibility & Installation Notes
Confirm the carbide grade on the supplied part or packaging when matching an existing knife. The listed radius describes the cutting-edge curve; it is not a corner radius. Match the original part number, pocket geometry and mounting details. Use the cutterhead manufacturer’s fastening and operating instructions.
Radius-Edge Square Knife
Tigra 100791 is designed to replace a worn cutting edge.
This component renews the working edge of a compatible cutter. The knife profile, seat and fastening arrangement must all match the tool body. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 15 mm long, 15 mm wide and 2.5 mm thick. The profile radius is 150 mm. Match the knife profile, seat and fastening arrangement to the cutterhead.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.