Working geometry
The reversible design provides another edge when the working edge wears.
Tigra 100744 – Square Reversible Knife – 9 × 9 × 1.5 mm
CA$15.00
In stock
SKU
100744
Tigra 100744 – Square Reversible Knife – 9 × 9 × 1.5 mm is available to buy in increments of 10
Product Class
Knife
Product Type
Square Reversible Knife
Manufacturer Part Number
100744
Knife Length (L)
9 mm
Knife Width (W)
9 mm
Knife Thickness (T)
1.5 mm
Fixing Hole Diameter (d)
4 mm
Tool Material
carbide
Cutting Edge Angle (degrees)
35
Cutting Edges
4
Square Reversible Knife
Tigra
100744
Designed to renew the cutting edge in a compatible cutter.
9 mmKnife Length (L)
9 mmKnife Width (W)
1.5 mmKnife Thickness (T)
4 mmFixing Hole Diameter (d)
Square Reversible Knife
Carbide cutting edges provide a hard, wear-resistant working surface.
KnifeSKU 100744
Match the knife profile, seat and fastening arrangement to the cutterhead.
Main Product Description
This Tigra square reversible knife is designed to renew the cutting edge in a compatible cutter.
The reversible design provides another edge when the working edge wears. Keep the seat clean and use the correct orientation and fastening procedure for the cutterhead. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 9 mm long, 9 mm wide and 1.5 mm thick.
Technical Specifications
100744 · Square Reversible Knife
- Tigra
- 100744
- Knife
- Square Reversible Knife
- Tigra knife and insert components
- 100744
- 9 mm
- 9 mm
- 1.5 mm
- 4 mm
- carbide
- 35
- 4
Component Configuration
woodworking with a matching knife carrier
Product Highlights
Cutting material
Carbide cutting edges provide a hard, wear-resistant working surface.
This version
The knife is 9 mm long, 9 mm wide and 1.5 mm thick.
Compatibility & Installation Notes
Confirm the carbide grade on the supplied part or packaging when matching an existing knife. Match the original part number, pocket geometry and mounting details. Use the cutterhead manufacturer’s fastening and operating instructions.
Square Reversible Knife
Tigra 100744 is designed to renew the cutting edge in a compatible cutter.
The reversible design provides another edge when the working edge wears. Keep the seat clean and use the correct orientation and fastening procedure for the cutterhead. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 9 mm long, 9 mm wide and 1.5 mm thick. Match the knife profile, seat and fastening arrangement to the cutterhead.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.