Working geometry
The scraper profile follows the edge to remove the remaining trim marks or material.
Tigra 035041 – Profiled Scraper Insert – 12.7 × 12.7 × 3.2 mm – R2
CA$69.85
In stock
SKU
035041
Tigra 035041 – Profiled Scraper Insert – 12.7 × 12.7 × 3.2 mm – R2 is available to buy in increments of 10
Product Class
Insert
Product Type
Profiled Scraper Insert
Manufacturer Part Number
035041
Knife Length (L)
12.7 mm
Knife Width (W)
12.7 mm
Knife Thickness (T)
3.2 mm
Profile Radius (R)
2 mm
Tool Material
carbide
Carbide Grade
T04F-CR
Profiled Scraper Insert
Tigra
035041
Designed to finish the edge after trimming.
12.7 mmKnife Length (L)
12.7 mmKnife Width (W)
3.2 mmKnife Thickness (T)
2 mmProfile Radius (R)
Profiled Scraper Insert
Carbide cutting edges provide a hard, wear-resistant working surface.
InsertSKU 035041
Match the knife profile, seat and fastening arrangement to the cutterhead.
Main Product Description
This Tigra profiled scraper insert is designed to finish the edge after trimming.
The scraper profile follows the edge to remove the remaining trim marks or material. Match its shape and orientation to the machine’s scraper unit. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 12.7 mm long, 12.7 mm wide and 3.2 mm thick. The profile radius is 2 mm.
Technical Specifications
035041 · Profiled Scraper Insert
- Tigra
- 035041
- Insert
- Profiled Scraper Insert
- Tigra knife and insert components
- 035041
- 12.7 mm
- 12.7 mm
- 3.2 mm
- 2 mm
- carbide
- T04F-CR
Component Configuration
scraping with a matching knife carrier
Product Highlights
Cutting material
Carbide cutting edges provide a hard, wear-resistant working surface.
This version
The knife is 12.7 mm long, 12.7 mm wide and 3.2 mm thick. The profile radius is 2 mm.
Compatibility & Installation Notes
Match the original part number, pocket geometry and mounting details. Use the cutterhead manufacturer’s fastening and operating instructions.
Profiled Scraper Insert
Tigra 035041 is designed to finish the edge after trimming.
The scraper profile follows the edge to remove the remaining trim marks or material. Match its shape and orientation to the machine’s scraper unit. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 12.7 mm long, 12.7 mm wide and 3.2 mm thick. The profile radius is 2 mm. Match the knife profile, seat and fastening arrangement to the cutterhead.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.