Working geometry
The scraper profile follows the edge to remove the remaining trim marks or material.
Tigra 035039 – Scraper Insert – 12.7 × 12.7 × 3.2 mm – R1
CA$69.85
In stock
SKU
035039
Tigra 035039 – Scraper Insert – 12.7 × 12.7 × 3.2 mm – R1 is available to buy in increments of 10
Product Class
Insert
Product Type
Scraper Insert
Knife Length (L)
12.7 mm
Knife Width (W)
12.7 mm
Knife Thickness (T)
3.2 mm
Profile Radius (R)
1 mm
Scraper Insert
Tigra
035039
Designed to finish the edge after trimming.
12.7 mmKnife Length (L)
12.7 mmKnife Width (W)
3.2 mmKnife Thickness (T)
1 mmProfile Radius (R)
Scraper Insert
The scraper profile follows the edge to remove the remaining trim marks or material. Match its shape and orientation to the machine’s scraper unit.
InsertSKU 035039
Match the knife profile, seat and fastening arrangement to the cutterhead.
Main Product Description
This Tigra scraper insert is designed to finish the edge after trimming.
The scraper profile follows the edge to remove the remaining trim marks or material. Match its shape and orientation to the machine’s scraper unit.
The knife is 12.7 mm long, 12.7 mm wide and 3.2 mm thick. The profile radius is 1 mm.
Technical Specifications
035039 · Scraper Insert
- Tigra
- 035039
- Insert
- Scraper Insert
- Tigra knife and insert components
- 12.7 mm
- 12.7 mm
- 3.2 mm
- 1 mm
Component Configuration
scraper replacement
Product Highlights
Part selection
Match the knife profile, seat and fastening arrangement to the cutterhead.
This version
The knife is 12.7 mm long, 12.7 mm wide and 3.2 mm thick. The profile radius is 1 mm.
Compatibility & Installation Notes
For help selecting a replacement, send Titan the original part number, machine model and a photo of the mounting. Match the original part number, pocket geometry and mounting details. Use the cutterhead manufacturer’s fastening and operating instructions.
Scraper Insert
Tigra 035039 is designed to finish the edge after trimming.
The scraper profile follows the edge to remove the remaining trim marks or material. Match its shape and orientation to the machine’s scraper unit.
The knife is 12.7 mm long, 12.7 mm wide and 3.2 mm thick. The profile radius is 1 mm. Match the knife profile, seat and fastening arrangement to the cutterhead.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.