Working geometry
This blank is intended for the specified knife or scraper system.
Tigra 016420 – Profiled Scraper Blank – 20 × 12 × 2 mm – R3
CA$69.85
In stock
SKU
016420
Tigra 016420 – Profiled Scraper Blank – 20 × 12 × 2 mm – R3 is available to buy in increments of 10
Product Class
Knife
Product Type
Profiled Scraper Blank
Manufacturer Part Number
016420
Knife Length (L)
20 mm
Knife Width (W)
12 mm
Knife Thickness (T)
2 mm
Fixing Hole Diameter (d)
4 mm
Profile Radius (R)
3 mm
Tool Material
carbide
Carbide Grade
T04F-CR
Profile Angle A (degrees)
6
Profiled Scraper Blank
Tigra
016420
Designed to prepare a replacement cutting profile.
20 mmKnife Length (L)
12 mmKnife Width (W)
2 mmKnife Thickness (T)
4 mmFixing Hole Diameter (d)
Profiled Scraper Blank
Carbide cutting edges provide a hard, wear-resistant working surface.
KnifeSKU 016420
Match the knife profile, seat and fastening arrangement to the cutterhead.
Main Product Description
This Tigra profiled scraper blank is designed to prepare a replacement cutting profile.
This blank is intended for the specified knife or scraper system. The finished profile and mounting details must match the cutter in which it will be used. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 20 mm long, 12 mm wide and 2 mm thick. The profile radius is 3 mm.
Technical Specifications
016420 · Profiled Scraper Blank
- Tigra
- 016420
- Knife
- Profiled Scraper Blank
- Tigra knife and insert components
- 016420
- 20 mm
- 12 mm
- 2 mm
- 4 mm
- 3 mm
- carbide
- T04F-CR
- 6
Component Configuration
scraping with a matching knife carrier
Product Highlights
Cutting material
Carbide cutting edges provide a hard, wear-resistant working surface.
This version
The knife is 20 mm long, 12 mm wide and 2 mm thick. The profile radius is 3 mm.
Compatibility & Installation Notes
Match the original part number, pocket geometry and mounting details. Use the cutterhead manufacturer’s fastening and operating instructions.
Profiled Scraper Blank
Tigra 016420 is designed to prepare a replacement cutting profile.
This blank is intended for the specified knife or scraper system. The finished profile and mounting details must match the cutter in which it will be used. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 20 mm long, 12 mm wide and 2 mm thick. The profile radius is 3 mm. Match the knife profile, seat and fastening arrangement to the cutterhead.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.