Working geometry
The reversible design provides another edge when the working edge wears.
Tigra 014100 – Reversible Knife – 20 × 12 × 1.5 mm
CA$18.00
In stock
SKU
014100
Tigra 014100 – Reversible Knife – 20 × 12 × 1.5 mm is available to buy in increments of 10
Product Class
Knife
Product Type
Reversible Knife
Manufacturer Part Number
014100
Knife Length (L)
20 mm
Knife Width (W)
12 mm
Knife Thickness (T)
1.5 mm
Tool Material
carbide
Carbide Grade
T10MG
Cutting Edge Angle (degrees)
45
Cutting Edges
2
Knife Surface
not polished
Reversible Knife
Tigra
014100
Designed to renew the cutting edge in a compatible cutter.
20 mmKnife Length (L)
12 mmKnife Width (W)
1.5 mmKnife Thickness (T)
014100SKU
Reversible Knife
Carbide cutting edges provide a hard, wear-resistant working surface.
KnifeSKU 014100
Match the knife profile, seat and fastening arrangement to the cutterhead.
Main Product Description
This Tigra reversible knife is designed to renew the cutting edge in a compatible cutter.
The reversible design provides another edge when the working edge wears. Keep the seat clean and use the correct orientation and fastening procedure for the cutterhead. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 20 mm long, 12 mm wide and 1.5 mm thick.
Technical Specifications
014100 · Reversible Knife
- Tigra
- 014100
- Knife
- Reversible Knife
- Tigra knife and insert components
- 014100
- 20 mm
- 12 mm
- 1.5 mm
- carbide
- T10MG
- 45
- 2
- not polished
Component Configuration
woodworking with a matching knife carrier
Product Highlights
Cutting material
Carbide cutting edges provide a hard, wear-resistant working surface.
This version
The knife is 20 mm long, 12 mm wide and 1.5 mm thick.
Compatibility & Installation Notes
Match the original part number, pocket geometry and mounting details. Use the cutterhead manufacturer’s fastening and operating instructions.
Reversible Knife
Tigra 014100 is designed to renew the cutting edge in a compatible cutter.
The reversible design provides another edge when the working edge wears. Keep the seat clean and use the correct orientation and fastening procedure for the cutterhead. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 20 mm long, 12 mm wide and 1.5 mm thick. Match the knife profile, seat and fastening arrangement to the cutterhead.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.