Working geometry
This component renews the working edge of a compatible cutter.
Tigra 013401 – Back-and-Cross-Grooved Knife – 50 × 5.5 × 1.1 mm
CA$25.00
In stock
SKU
013401
Tigra 013401 – Back-and-Cross-Grooved Knife – 50 × 5.5 × 1.1 mm is available to buy in increments of 10
Product Class
Knife
Product Type
Back-and-Cross-Grooved Knife
Manufacturer Part Number
013401
Knife Length (L)
50 mm
Knife Width (W)
5.5 mm
Knife Thickness (T)
1.1 mm
Tool Material
carbide
Edge / Groove Geometry
back groove, cross groove
Back-and-Cross-Grooved Knife
Tigra
013401
Designed to replace a worn cutting edge.
50 mmKnife Length (L)
5.5 mmKnife Width (W)
1.1 mmKnife Thickness (T)
013401SKU
Back-and-Cross-Grooved Knife
Carbide cutting edges provide a hard, wear-resistant working surface.
KnifeSKU 013401
Match the knife profile, seat and fastening arrangement to the cutterhead.
Main Product Description
This Tigra back-and-cross-grooved knife is designed to replace a worn cutting edge.
This component renews the working edge of a compatible cutter. The knife profile, seat and fastening arrangement must all match the tool body. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 50 mm long, 5.5 mm wide and 1.1 mm thick.
Technical Specifications
013401 · Back-and-Cross-Grooved Knife
- Tigra
- 013401
- Knife
- Back-and-Cross-Grooved Knife
- Tigra knife and insert components
- 013401
- 50 mm
- 5.5 mm
- 1.1 mm
- carbide
- back groove, cross groove
Component Configuration
woodworking with a matching knife carrier
Product Highlights
Cutting material
Carbide cutting edges provide a hard, wear-resistant working surface.
This version
The knife is 50 mm long, 5.5 mm wide and 1.1 mm thick.
Compatibility & Installation Notes
Confirm the carbide grade on the supplied part or packaging when matching an existing knife. Match the original part number, pocket geometry and mounting details. Use the cutterhead manufacturer’s fastening and operating instructions.
Back-and-Cross-Grooved Knife
Tigra 013401 is designed to replace a worn cutting edge.
This component renews the working edge of a compatible cutter. The knife profile, seat and fastening arrangement must all match the tool body. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 50 mm long, 5.5 mm wide and 1.1 mm thick. Match the knife profile, seat and fastening arrangement to the cutterhead.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.